4/2003
1
TP 300-3862-00-SW-S
Snapper Form No. 24536
Simplicity Form No. 1725536-00
Dealer Setup
& Adjustment Instructions
319 Series Single Stage Snowthrower
TABLE OF CONTENTS:
SAFETY RULES........................................................2
SETUP PROCEDURES
Quick Setup List.......................................................3
Unboxing and Assembly .........................................4
Fill Gas Tank.............................................................5
Auger Cable Adjustment .........................................6
Test Run....................................................................6
ATTENTION SETUP PERSONNEL:
319 Series Snowthrowers
Mfg. No.
Description
1694382
319M, 3HP Snowthrower, Manual Start
1694383
319E, 3HP Snowthrower, Electric Start
This Dealer Setup Instruction applies to the following units:
Sections and items denoted by the Setup sym-
bol provide the information necessary to fully
assemble, test, and prepare the units
described above for delivery to your customers.
A Quick Setup List is provided on page 3 of this
booklet to help you identify and check that the items
have been performed.
The safety warnings provided in this guide and
in the operator's manual included with the unit
contain important information that must be
obeyed when assembling, setting-up, operating, servic-
ing, transporting, or storing the unit.
These warnings are highlighted by the safety alert trian-
gle symbol shown above, which signifies that an impor-
tant safety message is being provided.
You must read, understand, and follow these warn-
ings and instructions, and use safe shop and work
practices at all times while working on or around this
unit and all other outdoor power equipment.
These instructions may cover additional models
issued after their printing. Refer to the Dealer
Setup Binder Index for complete listings.
