background image

 1 

 1 

 

 

 

 

 

 

 

 

DESCRIPTION 

Steel Structure 

Powder coated 

 

 

CONFORM 

 

 

 

 

ASSEMBLY INSTRUCTIONS 

TABLE TENNIS UMPIRE CHAIR 

PRODUCT REF 

 

S29350 

UNIT  

ASSEMBLY TIME 

The assembly time for tennis umpire chair is estimated at 30 minutes with 1 people. 

MAINTENANCE 

The equipement has to be regularly maintained by the owner. It is adviced to: 

- Check every week that all the screws are correctly tightened. 

- Fix paint defects if the module has been damaged, using the adapted paint, specified by the                          

manufacturer. 

- Replace all damaged or missing parts with a spare part recommended by the manufacturer.  

- Clean the product by using dishwasher soap, clean water, and soft cloth.

 

WARRANTY

 

One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has 

to be done within the legal period of the reception of the material. The warranty will not apply to:      

-    All degradation during the transport.      

-    All degradation due to use differing from which was intended. 

-    All degradation due to poor maintenance.      

-    Any defect claimed after the end of the legal period.     

 

-    Any damaged due to a faulty installation and assembly of the module.

 

 

Summary of Contents for S29350






Reviews: