background image

Before attempting installation, read these instructions and 

acquaint yourself with the component names. Great care 

has been taken to make this an easy-to-follow procedure. 

A little time spent understanding the system and its parts 

will assure a successful, trouble-free installation. 

CAUTION: SAFETY COMES FIRST 

When working on or around your roof or system, please 

take care to avoid hazards such as electrical wires and 

loose shingles. 

1410 | 

Rev. 05

SOL-INSTALL | 1608

©2014 UMA Solar

MODELS:

SLAR40DC-80HE-XE, SLAR40DC-80HE-XG, SLAR40DC-80HE, SLSG40DC-80HE-XE, SLSG40DC-80HE-XG, SLSG40DC-80HE, 

SLAR64DC-120HE-XE, SLAR64DC-80HE-XE, SLAR64DC-120HE-XG, SLAR64DC-80HE-XG, SLAR64DC-120HE, SLAR64DC-80HE, 
SLAR80DC-120HE-XE, SLAR80DC-80HE-XE, SLAR80DC-120HE-XG, SLAR80DC-80HE-XG, SLAR80DC-120HE, SLAR80DC-80HE, 

SLSG80DC-120HE-XE, SLSG80DC-80HE-XE, SLSG80DC-120HE-XG, SLSG80DC-80HE-XG, SLSG80DC-120HE, SLSG80DC-80HE, 

SLCO32DC-80HE-XE, SLCO32DC-80HE-XG, SLCO32DC-80HE, SLCO40DC-80HE-XE, SLCO40DC-80HE-XG, SLCO40DC-80HE, 

SLCO60DC-80HE, SLCO64DC-120HE-XE, SLCO64DC-80HE-XE, SLCO64DC-120HE-XG, SLCO64DC-80HE-XG, SLCO64DC-120HE, 
SLCO64DC-80HE, SLCO80DC-120HE-XE, SLCO80DC-80HE-XE, SLCO80DC-120HE-XG, SLCO80DC-80HE-XG, SLCO80DC-120HE, 

SLCO80DC-80HE, SLSG40DC-75HE-G, SLAR40DC-75HE-G, SLAR64DC-75HE-G, SLAR32DC-75HE-G

 SOLENE® INSTALLATION MANUAL

CLOSED LOOP DOMESTIC HOT WATER SOLAR SYSTEM 

WITH DIFFERENTIAL CONTROL

Summary of Contents for SLAR32DC-75HE-G































Reviews: