EN
WEATHER STATION Solight TE81
User's Manual
User's Manual Dear customer, thank you for purchasing our product. If you want to safely make full use of the features, please carefully read these instructions
and follow them. This way, you will avoid incorrect use or damage. Prevent unauthorized use of this device and always respect all rules regarding the handling of
electrical devices. Please, keep the manual for future use. The main unit should be as close to a window as possible.
TECHNICAL SPECIFICATIONS
We recommend using alkaline batteries with a nominal voltage of 1.5 V to
achieve the correct luminosity of the LCD display. NiMh accumulators
usually have a voltage of 1.2 V causing the LCD luminosity to be inferior.
Main Unit
If the unit is to be powered by batteries open the battery compartment cover and insert two alkaline AA batteries (not included). Mind the indicated polarity.
When powering up, for a moment, all of the LCD segments light up and the device makes a beep sound. It then goes into the standard temperature and
humidity measurement mode.
When the device is powered by an AC/DC adapter connect the power connector to the input socket on the weather station and then connect the adapter to a
power socket.
To reset the device, remove and reinsert the batteries or disconnect the adapter for at least five seconds. This will delete all settings and memory. When
powered by batteries, the display stays lit for eight seconds after each activation. When powered by the adapter, it stays lit continuously.
The main unit can be paired with up to three sensors. Each sensor is powered by two alkaline AA batteries (not included).
Default Settings:
24-hour time format showing 00:00, pressure in mb/hPa and temperature in °C.
1.
BUTTON FUNCTIONS
2.
MAIN FUNCTIONS
6 graphic levels of weather forecast: sunny, scattered clouds, cloudy, rainy, heavy rain, snow
RCC Signal Reception Mode: DCF
Calendar Span: 2000-2099, displaying date and day of the week
Time format 12/24 hours
Room Temperature Measurement
0°C to +50°
Room Humidity Measurement
20% to 95%
Outside Temperature Measurement
-20°C to +60°C
Outside Humidity Measurement
20% to 95%
Power supply
2x AA 1.5V alkaline battery
AC/DC adapter 5V/1200mA
Temperature Measurement Accuracy
1°C
Humidity Measurement Accuracy
5%
Atmospheric Pressure Measurement Range
600 hPa/mb – 1,100h Pa/mb
Controls
Functions
MEM
on/off
/ Z
Z
Standard
mode
Brief
push
Display
date / sec
Display
alarm time
/ date
Toggle between
°C/°F
Toggle individual
sensors / cyclical
sensor display
mode
Turns the
temperatu
re alarm
on/off
Change the
backlight
intensity
Display
stored max.
and min.
temperature
s and
humidity
Turn
alarm
on/off
Turn on
display
backlight /
snooze
HOLD
Access
time
setting
mode
Access
alarm
clock
setting
mode
RCC reception
mode activation
Sensor signal
reception
activation
Access
temperatu
re alarm
setting
mode
Enter pressure:
unit change
mode/forecast
change mode
Delete data
about max.
and min.
temperature
s and
humidity
-----
-----
Setting
Time
Brief
push
Confirm
setting
-----
One step forward
One step back
-----
-----
-----
-----
-----
HOLD
-----
-----
Fast forward
Fast backward
-----
-----
-----
-----
-----
Setting the
Alarm Clock
Brief
push
-----
-----
One step forward
One step back
-----
-----
-----
-----
-----
HOLD
-----
-----
Fast forward
Fast backward
-----
-----
-----
-----
-----
Setting the
temperatur
e alarm
Brief
push
-----
-----
One step forward
One step back
Toggling
the max.
and min.
temperatu
re settings
-----
-----
-----
-----
HOLD
-----
-----
Fast forward
Fast backward
-----
-----
-----
-----
-----
