background image

SERVICE MANUAL

Sony Video & Sound Products Inc.

FOR THE CUSTOMERS IN THE USA. NOT 

APPLICABLE IN CANADA, INCLUDING IN 

THE PROVINCE OF QUEBEC.
POUR LES CLIENTS AUX ÉTATS-UNIS. 

NON APPLICABLE AU CANADA, Y 

COMPRIS LA PROVINCE DE QUÉBEC.

AUDIO POWER SPECIFICATIONS

CTA2006 Standard
Power Output: 20 Watts RMS × 4 
at 4 Ohms < 1% THD+N
SN Ratio: 80 dBA 
(reference: 1 Watt into 4 Ohms)

Tuner section

FM

Tuning range: 87.5 MHz – 107.9 MHz
Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 

FM CCIR: -1,956.5 kHz to -487.3 kHz and 

+500.0 kHz to +2,095.4 kHz

Usable sensitivity: 7 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 73 dB
Separation: 50 dB at 1 kHz
Frequency response: 20 Hz – 15,000 Hz

AM

Tuning range: 530 kHz – 1,710 kHz
Antenna (aerial) terminal: 

External antenna (aerial) connector

Sensitivity: 26 μV

CD Player section

Signal-to-noise ratio: 95 dB
Frequency response: 10 Hz – 20,000 Hz
Wow and flutter: Below measurable limit
The maximum number of: (CD-R/CD-RW 

only)

–folders (albums): 150 (including root 

folder)

–files (tracks) and folders: 300 (may less 

than 300 if folder/file names contain many 
characters)

–displayable characters for a folder/file 

name: 32 (Joliet)/64 (Romeo)

Corresponding codec: MP3 (.mp3) and WMA 

(.wma)

USB Player section

Interface: USB (Full-speed)
Maximum current: 500 mA
The maximum number of recognizable 

tracks: 

–folders (albums): 256
–files (tracks) per folder: 256
Compatible Android Open Accessory 

protocol (AOA): 2.0

Corresponding codec:

MP3 (.mp3)

Bit rate: 8 kbps – 320 kbps (Supports 

VBR (Variable Bit Rate))

Sampling rate: 16 kHz – 48 kHz

WMA (.wma)

Bit rate: 32 kbps – 192 kbps (Supports 

VBR (Variable Bit Rate))

Sampling rate: 32 kHz, 44.1 kHz, 

48 kHz

FLAC (.flac)

Bit depth: 16 bit, 24 bit
Sampling rate: 44.1 kHz, 48 kHz

Power amplifier section

Output: Speaker outputs
Speaker impedance: 4 Ω – 8 Ω
Maximum power output: 55 W × 4 (at 4 Ω)

General

Outputs:

Audio outputs terminal (REAR, SUB)
Power antenna (aerial)/Power amplifier 

control terminal (REM OUT)

Inputs:

Remote controller input terminal
Antenna (aerial) input terminal
AUX input jack (stereo mini jack)
USB port

Power requirements: 12 V DC car battery 

(negative ground (earth))

Rated current consumption: 10 A
Dimensions: 

Approx. 178 mm × 50 mm × 177 mm 
(7 

1

/

8

 in × 2 in × 7 in) (w/h/d)

Mounting dimensions: 

Approx. 182 mm × 53 mm × 160 mm 
(7 

1

/

4

 in × 2 

1

/

8

 in × 6 

5

/

16

 in) (w/h/d)

Mass: Approx. 1.2 kg (2 lb 11 oz)
Package contents:

Main unit (1)
Remote commander (1): RM-X211

Parts for installation and connections 

(1 set)

Design and specifications are subject to 
change without notice.

FM

(US, CND)

Tuning range:

When [AREA] is set to [EUROPE]:
87.5 MHz – 108.0 MHz
When [AREA] is set to [RUSSIA]:
FM1/FM2: 87.5 MHz – 108.0 MHz 

(at 50 kHz step)

FM3: 65 MHz – 74 MHz (at 30 kHz step)

Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 

When [AREA] is set to [EUROPE]:
FM CCIR: -1,956.5 kHz to -487.3 kHz and 

+500.0 kHz to +2,095.4 kHz

When [AREA] is set to [RUSSIA]:
FM CCIR: -1,956.5 kHz to -487.3 kHz and 

+500.0 kHz to +2,095.4 kHz

FM OIRT: -1,815.6 kHz to -943.7 kHz and 

+996.6 kHz to +1,776.6 kHz

Usable sensitivity: 7 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 73 dB
Separation: 50 dB at 1 kHz
Frequency response: 20 Hz – 15,000 Hz

MW/LW

Tuning range:

MW: 531 kHz – 1,602 kHz
LW: 153 kHz – 279 kHz

Antenna (aerial) terminal: 

Sensitivity: MW: 26 μV, LW: 50 μV

External antenna (aerial) connector

FM

Tuning range:

87.5 MHz – 108.0 MHz (at 50 kHz step)
87.5 MHz – 108.0 MHz (at 100 kHz step)
87.5 MHz – 107.9 MHz (at 200 kHz step)
For Argentine models: 
87.5 MHz – 107.9 MHz

FM tuning step (except for Argentine 

models):
50 kHz/100 kHz/200 kHz switchable

Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 

FM CCIR: -1,956.5 kHz to -487.3 kHz and 

+500.0 kHz to +2,095.4 kHz

Usable sensitivity: 7 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 73 dB
Separation: 50 dB at 1 kHz
Frequency response: 20 Hz – 15,000 Hz

AM

Tuning range:

531 kHz – 1,602 kHz (at 9 kHz step)
530 kHz – 1,710 kHz (at 10 kHz step)
For Argentine models: 
530 kHz – 1,710 kHz

AM tuning step (except for Argentine 

models):
9 kHz/10 kHz switchable

Antenna (aerial) terminal: 

External antenna (aerial) connector

Sensitivity: 26 μV

Sensitivity: 26 μV

(US, CND)

(AEP, UK, HK)

(E, AR, KR, AUS)

(EA)

(Except AEP, UK, HK)

FM

Tuning range: 87.5 MHz – 108.0 MHz
Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 

FM CCIR: -1,956.5 kHz to -487.3 kHz and 

+500.0 kHz to +2,095.4 kHz

Usable sensitivity: 7 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 73 dB
Separation: 50 dB at 1 kHz
Frequency response: 20 Hz – 15,000 Hz

MW

Tuning range: 531 kHz – 1,602 kHz
Antenna (aerial) terminal: 

External antenna (aerial) connector

Sensitivity: 26 μV

SW

Tuning range:

SW1: 2,940 kHz – 7,735 kHz
SW2: 9,500 kHz – 18,135 kHz 
(except for 10,140 kHz – 11,575 kHz)

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency:

-2,463.8 kHz to -1,710.1 kHz and 

+1,710.0 kHz to +2,418.4 kHz

SPECIFICATIONS

9-896-303-01

2016H33-1

© 

2016.08

US Model

Canadian Model

Australian Model

Hong Kong Model

Argentina Model

CDX-G1200U

AEP Model

UK Model

Saudi Arabia Model

CDX-G1200U/G1201U/G1202U

E Model

Korean Model

CDX-G1200U/G1201U

Indian Model

CDX-G1200U/G1280UM

Ver. 1.0  2016.08

Model Name Using Similar Mechanism

CDX-G1100U/G1150U/G3100UP

Mechanism Type

MG-101CF-188

Optical Pick-up Name

DAX-25A

•  The tuner and CD sections have no adjustments.

The service manual of the mechanism deck, used in 
this model, has been issued in a separate volume. 
Please refer to the service manual of the MG-101 
series for the mechanism deck information.

Photo: CDX-G1200U

CDX-G1200U/G1201U/

G1202U/G1280UM

US, Canadian, E, Argentina, Korean, Indian and Australian models

FM/AM COMPACT DISC PLAYER

AEP, UK and Hong Kong models

FM/MW/LW COMPACT DISC PLAYER

Saudi Arabia model

FM/MW/SW COMPACT DISC PLAYER

Summary of Contents for CDX-G1200U









































Reviews: