background image

SERVICE MANUAL

Sony Video & Sound Products Inc.

SPECIFICATIONS

HOME AUDIO SYSTEM

9-896-299-05

2017B33-1

© 

2017.02

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Ver. 1.4  2017.02

50 mm (2 in) × 2, cone type

130 mm (5

in) × 2, cone type

Voltage 2 V, impedance 10 kilohms 

Voltage 2 V, impedance 600 ohms

Speaker section

Tweeter:

Woofer:

Inputs

AUDIO/PARTY CHAIN IN L/R:

Outputs

AUDIO/PARTY CHAIN OUT L/R:

BLUETOOTH section

Communication system:

BLUETOOTH Standard version 3.0

Output:

BLUETOOTH Standard Power Class 2

Maximum communication range:

Line of sight approx. 10 m (33 feet)

1)

Frequency band:

2.4 GHz band (2.4000 GHz – 
2.4835 GHz)

Modulation method:

FHSS (Freq Hopping Spread 
Spectrum)

Compatible BLUETOOTH profiles

2)

:

A2DP (Advanced Audio Distribution 
Profile)
AVRCP (Audio Video Remote Control 
Profile)
SPP (Serial Port Profile)

Supported codecs:

SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
LDAC

1)

  The actual range will vary depending 

on factors such as obstacles between 
devices, magnetic fields around a 
microwave oven, static electricity, 
reception sensitivity, antenna’s 
performance, operating system, software 
application, etc.

2)

  BLUETOOTH standard profiles indicate the 

purpose of BLUETOOTH communication 
between devices.

General

Power requirements: 

60 Hz

Power consumption:

Standby power consumption:

When BLUETOOTH standby mode is 

When BLUETOOTH standby mode is 

ports on)

Dimensions (W/H/D) (Approx.):

Mass (Approx.):

Quantity of the system:

1 piece

Supplied accessories: 

AC power cord (1)

50/60 Hz

North American model: AC 120 V,

Other models: AC 120 V 

– 

240 V,

50/60 Hz

Korean model: AC 220 V 

– 

240 V,

50/60 Hz

Taiwan model: AC 120 V,

30 W

set to off: 0.5 W (eco mode)

set to on: 2.8 W (all wireless network 

262 mm × 524 mm ×  273 mm
(10

in × 20

in × 10

in)

7 kg (15 lb 7 oz)

AC plug adaptor* (1) (E4, SP6, LA)

*  This plug adaptor is not for the use 

in Chile, Paraguay and Uruguay. Use 
this plug adaptor in the countries 
where it is necessary.

Design and specifications are subject to 
change without notice.

GTK-XB5

Summary of Contents for GTK-XB5















































Reviews: