background image

file:///Users/johannalc40/Documents/guide%20to%20the%20nx5u.html[10/25/12 2:40:02 PM]

Guide to using the 

Sony HXR-NX5U

Adapted from the Guide to using the Sony HDR-AX2000 

©Campbell Cameras 

Detailed  information(text) and  camera images  not to be used  without CampbellCameras Written Permission

YOU CAN CLICK ON ANY  PHOTO  TO ENLARGE  IT TO SEE  THE DETAILS

Things to Remember:

If a menu item is "grayed" out, it means that that option is not available under the current recording condition.

DO NOT EXPOSE your camcorder's lens or LCD viewfinder to the sun for extended amount of time as it will

damage them. Be sure and use the Lens Hood and an 

LCD Hood

 if filming in sunny conditions. 

Temperature - The camcorder is not recommended in weather conditions below 32º as it can affect your recordings.

To solve this you can get a Polar Mitten Cover that allows you to place heat warmers in it to keep your video

camera warm. Batteries will be effected when the temperature reaches below 32º, and the battery life will go down. It

is important to a) keep your batteries warm and b) have 

extra batteries

 when filming in colder situations. 

I recommend formatting your SD cards when they are new, and when reusing the cards. ALL DATA RECORDED ON

THE MEMORY CARD WILL BE ERASED BY FORMATTING, AND CAN NOT BE RECOVERED. Save important data on

the memory card on other media such as a computer, before formatting the memory card.

Like your trusty 12 gauge, the Sony HXR-NX5U is a camera that can handle any situation. It

contains all the features of the AX2000 (72mm lens, 3-1/3" CMOS chips, 2 XLR ports, 2 SD card

slots and a 1.5 lux) plus more. Its built in GPS can direct you back to the exact spot you made the

shot from, perfect for recreates or for B-roll footage. Two accessories shoes on the top handle

make it even easier to attach a wireless mic or other accessories. Perhaps the biggest draw of the

NX5U is the option to add on the 

FMU 128

. It is an additional storage device capable of holding

11+ hours of video while you are simultaneously recording to the SD cards giving you an instant

back-up of all your recordings. An included shotgun mic and XLR cable round out this set-up to

make it the complete package for anyone seriously into outdoor filming.

I

nserting Memory Cards

:

The SD Card slots are located in the back of the camera next to the battery. To insert SD cards into the camera you

1) Open the cover

2) Take your memory card with the notched corner facing down, and insert into the memory card slot until it clicks. 

3) Repeat with memory card slot B.

FORMATTING MEMORY CARDS

1) Press the MODE button

2) Touch [MANAGE MEDIA] –> [MEDIA FORMAT]

3) Touch the memory card to be formatted

Summary of Contents for HXR-NX5U






















Reviews: