3
2
4
6
5
1
How to use
Connect the AC adaptor.
Charge the headphones.
Connect the A/V component, following hookup
or
below.
Using the headphone jack of the A/V component
Headphone jack
(Stereo mini jack)
TV, Digital music player, etc.
L (white)
R (red)
Plug adaptor (Stereo mini jack ×1
Pin plug ×2, not supplied)
Audio out
(L/R) jacks
Stereo system, Blu-ray Disc player, DVD player, TV*, etc.
* In case of no headphone jack.
If the sound is distorted by connecting the transmitter to the A/V component’s
audio out (L/R) jacks, reconnect the transmitter to the headphone jack.
Start playback of the A/V component.
Wear the headphones.
Before listening
Be sure to lower the volume of the headphones after the
/
(On/Standby)
indicator lights up, to reduce the risk of hearing damage.
Tactile dot
Hold down until
indicator lights up.
Checking the included
items
Transmitter TMR-HW300 (1)
Headphones MDR-HW300 (1)
AC adaptor (1)
Micro-USB cable (approx. 50 cm) (1)
Connecting cable (approx. 1.5 m) (1)
Features
Thank you for purchasing the Sony MDR-HW300K Wireless
Stereo Headphone System. Before operating the unit,
please read this manual thoroughly and retain it for future
reference.
Some features are:
ˋ
ˋ
High quality sound with uncompressed digital
wireless transmission
2.4 GHz digital wireless transmission prevents
interference of obstacles. High quality sound with
uncompressed digital wireless transmission.
ˋ
ˋ
Powerful and expressive sound
Powerful and expressive sound with 40 mm
neodymium driver unit.
ˋ
ˋ
Comfortable fit even for a long period of time
Comfortable fit for long period of time with soft
earpads and head cushion.
ˋ
ˋ
Real-time automatic channel selection prevents
sound break up
Real-time automatic channel selection on headphone
system for best reception of signal. This system can
switch to a free channel automatically without any
sound interruption before the signal is blocked.
ˋ
ˋ
Volume control function on headphones
ˋ
ˋ
Easy charging with USB port
3 hours to fully charge the battery, and approx. 10 hours
playback time. Can be used while charging the
headphones.
ˋ
ˋ
Wired design option
Also works wired design headphones with supplied
connecting cable. You can enjoy content on a
smartphone, PC and tablet with this wired option.
ˋ
ˋ
Swivel design for easy storage
Adjust the volume.
The headphones will beep when the volume reaches
maximum or minimum.
Tactile dot
After use
1
Stop playback of the A/V
component.
2
Hold down the
/
(On/Standby)
button of the headphones until the
/
indicator turns off.
Tip
The headphones will turn off
automatically if RF signal transmission
from the transmitter stops for about 5
minutes.
If no signal or low signal is input for
about 10 minutes
If the transmitter detects no signal, the POWER indicator of the
transmitter blinks for about 10 minutes, then the transmitter stops
the RF signal transmission automatically*. The transmitter restarts
after receiving an audio signal again.
The transmitter may also stop if the volume of the connected A/V
component is too low. In this case, raise the volume of the
connected A/V component within the range where the sound is
not distorted, then lower the volume of the headphones.
* If signal noise is output from the connected A/V component, the
transmitter may not turn off, even when no audio signal is input.
English
Wireless Stereo Headphone System
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To reduce the risk of fire or electric shock, do not expose
this apparatus to dripping or splashing, and do not place
objects filled with liquids, such as vases, on the apparatus.
Do not expose the batteries (battery pack or batteries
installed) to excessive heat such as sunshine, fire or the
like for a long time.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
As the main plug of AC power adaptor is used to
disconnect the AC power adaptor from the mains, connect
it to an easily accessible AC outlet. Should you notice an
abnormality in it, disconnect it from the AC outlet
immediately.
The unit is not disconnected from the mains as long as it
is connected to the AC outlet, even if the unit itself has
been turned off.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
The nameplate is located on the bottom of the transmitter.
Hereby, Sony Corp., declares that this equipment is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
For details, please access the following URL :
http://www.compliance.sony.de/
The validity of the CE marking is restricted to only those
countries where it is legally enforced, mainly in the
countries EEA (European Economic Area).
Disposal of Old Electrical & Electronic
Equipment (Applicable in the European
Union and other European countries with
separate collection systems)
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural
resources. For more detailed information about recycling
of this product, please contact your local Civic Office, your
household waste disposal service or the shop where you
purchased the product.
Disposal of waste batteries (applicable
in the European Union and other
European countries with separate
collection systems)
This symbol on the battery or on the
packaging indicates that the battery provided with this
product shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if the
battery contains more than 0.0005% mercury or 0.004%
lead.
By ensuring these batteries are disposed of correctly, you
will help prevent potentially negative consequences for
the environment and human health which could
otherwise be caused by inappropriate waste handling of
the battery. The recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualified service staff only.
To ensure that the battery will be treated properly, hand
over the product at end-of-life to the applicable collection
point for the recycling of electrical and electronic
equipment.
For all other batteries, please view the section on how to
remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where
you purchased the product.
Notice for customers: the following information is only
applicable to equipment sold in countries applying EU
directives
This product has been manufactured by or on behalf of
Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075
Japan. Inquiries related to product compliance based on
European Union legislation shall be addressed to the
authorized representative, Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any
service or guarantee matters, please refer to the
addresses provided in the separate service or guarantee
documents.
(Red)
(Off)
Complete when indicator
turns off.
To AC
outlet
Using the unit by connecting the supplied cable
You can use the unit as ordinary wired headphones by connecting the supplied connecting cable. You can also
charge the headphones during wired use. Be sure to use the supplied connecting cable.
To reduce the risk of hearing damage, lower the volume of the A/V component before connection.
Supplied connecting cable
Storing the headphones
Check right and left of the headphones before swiveling to store.
Using the audio out (L/R) jacks of the A/V component
Use a plug adaptor (not supplied) between the transmitter and the A/V component.
Wireless Stereo
Headphone System
Operating Instructions
4-478-288-
11
(1)
MDR-HW300K
©2013 Sony Corporation Printed in China
