background image

– 1 –

Model Name Using Similar Mechanism

NEW

Mini Disc Mechanism Type

MG-798K-133

Optical Pick-up Name

KMS-241A/J2N

SERVICE MANUAL

US Model

Canadian Model

AEP Model

UK Model

E Model

MDX-62

MINIDISC CHANGER

MICROFILM

System

Mini disc digital audio system

Laser Diode Properties

Material: GaAlAs
Wavelength: 780 nm
Emission Duration: Continuous
Laser output Power: Less than
44.6 

µ

W*

This output is the value measured at a distance of

200 mm from the objective lens surface on the
Optical Pick-up Block.

Frequency response

10 – 20,000 Hz

Wow and flutter Below measurable limit
Signal-to-noise ratio

95 dB

Outputs

Bus control output (8 PIN)
Analog audio output (RCA PIN)

Current drain

300 mA (MD playback)
600 mA (during loading or ejecting a
disc)

Dimensions

Approx. 176 

×

 83.5 

×

 130 mm

(7 

×

 3 

3

/

8

 

×

 5 

1

/

8

 in.) (w/h/d) not incl.

projecting parts and controls

Mass

Approx. 1.1 kg (2 lb. 7 oz.)

Power requirement

12 V DC car battery (negative
ground)

Supplied accessories

Mounting hardware (1 set)
Bus cable 5.5 m (1)
RCA pin cord 5.5 m (1)

• U.S. and foreign patents licensed from Dolby

Laboratories Licensing Corporation.

• Design and specifications subject to change without

notice.

SPECIFICATIONS

• Electrical adjustment of this set is automatically performed.

• Sony BUS system compatible with mobile MD

changers.

• Direct-in system for inserting and removing

MDs easily.

• No waiting time to change discs in continuous

play.

• The MD changer compartment has a built in light

for easy use even in the dark.

• 1 bit Digital/Analog converter for high quality

sound reproduction.

• The Digital D-BASS function* creates an even

sharper and more powerful sound than Analog
D-BASS.

This unit supports Digital D-BASS function if the

master unit also has Digital D-BASS function.

FEATURES

Summary of Contents for MDX-62






































Reviews: