C:\_Work\TV\Raptor_ReferenceGuide\US\4434468111\4434468111NSZGP9U2\US1U2.fm
masterpage:Right
NSZ-GP9
4-434-468-
11
(1)
Owner’s Record
The model and serial numbers are located at the bottom of
the unit. Record the serial number in the space provided
below. Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No.______________
Serial No.______________
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
To avoid electric shock, do not open the cabinet. Refer
servicing to qualified personnel only.
Batteries or batteries installed apparatus shall not be
exposed to excessive heat such as sunshine, fire or the
like.
CAUTION
The use of optical instruments with this product will
increase eye hazard. As the laser beam used in this
Blu-ray Disc/DVD player is harmful to eyes, do not attempt
to disassemble the cabinet. Refer servicing to qualified
personnel only.
This label is located on the laser protective housing inside
the enclosure.
This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
This graphical symbol is located on the bottom of the unit.
Precautions
• To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
• The player is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the player itself has been turned off.
• Install this unit so that the AC power cord can be
unplugged from the wall socket immediately in the event
of trouble.
• The nameplate is located on the bottom of the player.
Installing
• Do not install this player in a confined space, such as a
bookshelf or similar unit.
FCC WARNING
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
The shielded Interface cable (LAN cable) must be used
with the equipment in order to comply with the limits for a
digital device pursuant to Subpart B of Part 15 of FCC
Rules.
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
FCC/IC Radiation Exposure
Statement:
For Blu-ray Disc/DVD player
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment should be
installed and operated keeping the radiator at least 20 cm
or more away from person’s body (excluding extremities:
hands, wrists, feet and ankles).
For Remote control
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that are deemed to comply without
testing of specific absorption ratio (SAR).
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
For Remote control
This Class B digital apparatus complies with Canadian
ICES-003.
Important Safety
Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10)Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11)Only use attachments/accessories specified by the
manufacturer.
12)Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
WARNING
13)Unplug this apparatus during lightning storms or
when unused for long periods of time.
14)Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Precautions
On placement
• Place the player in a location with adequate
ventilation to prevent heat build-up in the player.
• Do not place the player on a soft surface such as a
rug that might block the ventilation holes.
• Do not place the player in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
• Do not place the player outdoors, in vehicles, on
ships, or on other vessels.
• If the player is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may form on the outer surface and on interior of the
player.
Should this occur, the player may not operate
properly. In this case, leave the player turned on for
about half an hour until the moisture evaporates.
• Do not install the player in an inclined position. It is
designed to be operated in a horizontal position only.
• Do not place metal objects in front or on the both
sides of the player. It may limit reception of radio
waves.
• Do not place the player in a place where medical
equipment is in use. It may cause a malfunction of
medical instruments.
• If you use a pacemaker or other medical device,
consult your physician or the manufacturer of your
medical device before using the wireless LAN
function.
• Do not place heavy or unstable objects on the
player.
• Do not insert any objects other than discs inside the
disc slot. Doing so may cause damage to the player
or the object.
• Take out any discs when you move the player. If you
don’t, the disc may be damaged.
• Disconnect the AC power cord and all other cables
from the player when you move the player.
On power sources
• Disconnect the player from the wall outlet if you are
not going to use the player for a long time. To
disconnect the AC power cord, grasp the plug itself;
never pull the cord.
• Observe following points to prevent the AC power
cord being damaged. Do not use the AC power cord
if it is damaged, as doing so may result in an electric
shock or fire.
– Do not pinch the AC power cord between the
player and wall, shelf, etc.
– Do not put anything heavy on the AC power cord or
pull on the AC power cord itself.
On adjusting volume
Do not turn up the volume while listening to a section
with very low level inputs or no audio signals. If you do,
your ears and the speakers may be damaged when a
peak level section is played.
On cleaning
Clean the cabinet, panel, and controls with a soft cloth.
Do not use any type of abrasive pad, scouring powder
or solvent such as alcohol or benzine.
On cleaning discs, disc/lens cleaners
Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause the
apparatus to malfunction.
On replacement of parts
In the events that this player is repaired, repaired parts
may be collected for reuse or recycling purposes.
On connecting to the HDMI jack
Observe the following as improper handling may
damage the HDMI jack and the connector.
• Carefully align the HDMI jack on the rear of the player
and the HDMI connector by checking their shapes.
Make sure the connector is not upside down or tilted.
• Be sure to disconnect the HDMI cable when moving
the player.
• Hold the HDMI connector straight when connecting
or disconnecting the HDMI cable. Do not twist or
force the HDMI connector into the HDMI jack.
Notes About the Discs
• To keep the disc clean, handle the disc by its edge.
Do not touch the surface.
Dust, fingerprints, or scratches on the disc may
cause it to malfunction.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature may rise
considerably inside the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe the disc
from the center out.
• Do not use solvents such as benzine, thinner,
commercially available disc/lens cleaners, or
anti-static spray intended for vinyl LPs.
• If you have printed the disc’s label, dry the label
before playing.
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-standard shape (e.g., card,
heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker adhesive
on it.
• Do not resurface the playing side of a disc to remove
surface scratches.
On watching 3D video images
Some people may experience discomfort (such as eye
strain, fatigue, or nausea) while watching 3D video
images.
Sony recommends that all viewers take regular breaks
while watching 3D video images. The length and
frequency of necessary breaks will vary from person to
person.
You must decide what works best. If you experience
any discomfort, you should stop watching the 3D video
images until the discomfort ends; consult a doctor if
you believe necessary. You should also review (i) the
instruction manual and/or the caution message of any
other device used with, or Blu-ray Disc contents
played with this product and (ii) our website
(http://esupport.sony.com/) for the latest information.
The vision of young children (especially those under
six years old) is still under development. Consult your
doctor (such as a pediatrician or eye doctor) before
allowing young children to watch 3D video images.
Adults should supervise young children to ensure they
follow the recommendations listed above.
If you have any questions or problems concerning
your player, please consult your nearest Sony dealer.
Cinavia Notice
This product uses Cinavia technology to limit the use
of unauthorized copies of some
commercially-produced film and videos and their
soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be
displayed and playback or copying will be interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer Information
Center at http://www.cinavia.com.
To request additional information about Cinavia by
mail, send a postcard with your mailing address to:
Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
HDMI jack
HDMI jack
IMPORTANT NOTICE
Caution: This player is capable of holding a
still video image or on-screen display image
on your television screen indefinitely. If you
leave the still video image or on-screen
display image displayed on your TV for an
extended period of time, you risk permanent
damage to your television screen. Plasma
display panel televisions and projection
televisions are susceptible to this.
Reference Guide
Blu-ray Disc™/DVD Player
4-434-468-
11
(1)
NSZ-GP9
Printed in China
© 2012 Sony Corporation
US
Sony Customer Support
USA: http://esupport.sony.com/ | 1-800-222-SONY
Canada: http://esupport.sony.com/CA/ | 1-877-899-SONY
Please Do Not Return the Product to the Store
US1U2.fm Page 1 Tuesday, March 27, 2012 2:25 PM
