background image

Digital Photo Frame

Read This First

Welcome to the Sony DPF-D82/D92 Digital Photo Frame.

This leaflet explains preparations and basic viewing procedures.

To enjoy a variety of viewing options or customize your photo frame, 

please read the operating instructions also supplied.

Checking the contents of the package

(The illustrations are of the DPF-D92. The locations and names of buttons and connectors of 

the DPF-D82 are identical to those of the DPF-D92, although the LCD screen size and shape 

is different.)

Digital photo frame (1)

Stand (1)

Remote control (1)

AC adaptor (1)

Operating Instructions (1)

Read This First (this manual) (1)

Warranty (1) 

(In some regions, the warranty is not supplied.)

1

 Preparing the remote control. 

The supplied lithium battery (CR2025) has already been inserted into 

the remote control.
Pull out the protective sheet before use as shown in the figure.

2

 Preparing the photo frame. 

Screw the stand supplied with the photo frame into the screw hole 

firmly until the stand stops turning (when you use the photo frame 

as a photo stand).

3

 Connecting to the AC power source. 

1

  Insert the plug of the AC adaptor into the DC IN 12 V jack on the 

rear of the photo frame.

2

  Connect the AC adaptor to the wall outlet.

4

 Turn the photo frame on. 

 

1

  Set to the POWER switch to ON.

The standby indicator turns green and the Sony logo on the 

front panel lights up.

 Tips

Keep the POWER set to ON, when you use the alarm function or the auto power on/off function.
The value of the following settings are returned to their factory settings if you turn the photo frame to 

OFF, and leave it off for a long time.

the setting value of [Date/time settings]

the setting time of the alarm function and the auto power on/off function

5

 Set the current time. 

1

  Press MENU.

2

  Press 



 to select the   (Settings) tab.

3

  Press 



 to select [Date/time settings] and then press  .

4

  Set the current time following the guidance on the screen.

     

6

 Insert a memory card into the slot. 

1

  Insert a memory card firmly into the corresponding slot.

The access lamp flashes when the memory card is inserted 

correctly. Reinsert the memory card after checking the label 

side of the memory card if the access lamp does not flash. 

The status of each memory card is as follows.

 Note

All memory cards have a back-side and front-side, and an insertion direction. Refer to the following 

illustration and insert the memory card while you take note of its shape and the appropriate slot.  

It may cause malfunction if you insert the card in the wrong direction.

2

  The slideshow of the memory card you inserted starts 

automatically.

You can enjoy a variety of slideshow styles. (

)

DPF-D82/D92

© 2009  Sony Corporation   printed in China

4-129-233-

11

(1)

P/N7525000015A

Protective sheet

“Memory Stick”

“Memory Stick Duo”

CompactFlash card

SD memory card

xDPicture Card

To the DC IN 12 V jack

AC adaptor

To wall outlet

Reviews: