background image

SA-VE525 (GB/CS) 4-233-674-

61

(1)

 

2001 Sony Corporation

Printed in China

eE Ee

E

e

Ee

Ee

Ee

Ee

Ee

LINE IN

WOOFER OUT

FRONT

CENTER

REAR

R

R

L

L

A

R

L

R

L

Ee

Ee

SPEAKER

IN

SPEAKER

OUT

e

e

E

E

eE Ee

E

e

FRONT

CENTER

REAR

R

R

L

L

Ee

Ee

Ee

B

E

e

E

e

E

e

E

e

C

 English

Hooking up the system

Connect the speaker system to the speaker output
terminals of an amplifier.
Make sure power to all components (included the
subwoofer) is turned off before starting the hook-up.

Hookup 

A

This configuration is used when the amplifier is
connected to a DVD player, LD player, VCR or other
video devices.

Hookup 

B

Try this configuration instead of “Hookup 

A

” in the

following situations:
—When there are no jacks on the amplifier for a

subwoofer.

—When you want a stronger bass sound from the

subwoofer.

Notes (

C

)

• Make sure the plus (+) and the minus (–) terminals on

the speakers are matched to the corresponding plus (+)
and minus (–) terminals on the amplifier.

• Be sure to tighten the screws of the speaker terminals

securely as loose screws may become a source of noise.

• Make sure all connections are firm.  Contact between

bare speaker wires at the speaker terminals may cause
a short-circuit.

• Do not connect the subwoofer to the amplifier’s

CENTER output terminal (which is for Dolby Pro Logic
or Dolby Digital).  No bass sound will output from the
subwoofer if you do.

• For details regarding the connections on the amplifier

side, refer to the manual that was provided with your
amplifier.

Tip

All striped wires are minus (–) in polarity, and should be
connected to the minus (–) speaker terminals.

Front (Right)

前(右)

Subwoofer

超低音扬声器

Front (Left)

前(左)

Rear (Right)

后(右)

Rear (Left)

后(左)

Amplifier

放大器

Rear (Right)

后(右)

Rear (Left)

后(左)

Front (Right)

前(右)

Subwoofer

超低音扬声器

Front (Left)

前(左)

Amplifier

放大器

Precautions

On safety

• Before operating the system, be sure that the operating

voltage of the system is identical with that of your local
power supply.

• The unit is not disconnected from the AC power source

(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.

• Unplug the system from the wall outlet if it is not to be

used for an extended period of time.  To disconnect the
cord, pull the cord by grasping the plug.  Never pull
the cord itself.

• Should any liquid or solid object fall into the system,

unplug the system’s power cord and have the system
checked by qualified personnel before operating it any
further.

• AC power cord must be changed only at the qualified

service shop.

On operation

• Do not drive the speaker system with a continuous

wattage exceeding the maximum input power of the
system.

• If the polarity of the speaker connections are not

correct, the bass tones will be weak and the position of
the various instruments obscure.

• Contact between bare speaker wires at the speaker

terminals may result in a short-circuit.

• Before connecting, turn off the amplifier to avoid

damaging the speaker system.

If you encounter color irregularity on a
nearby TV screen

This speaker system is magnetically shielded to allow it
to be installed near a TV set.  However, color
irregularities may still be observed on certain types of TV
sets.

If color irregularity is observed...

c

Turn off the TV set once, then turn it on again after
15 to 30 minutes.

If color irregularity is observed again...

c

Place the speakers further away from the TV set.

If howling occurs

Reposition the speakers or turn down the volume on the
amplifier.

On placement

• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:

— Extremely hot or cold
— Dusty or dirty
— Very humid
— Subject to vibrations
— Subject to direct sunlight

On cleaning

Clean the speaker cabinets with a soft cloth lightly
moistened with a mild detergent solution or water.  Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.

If you have any questions or problems concerning your
speaker system, please consult your nearest Sony dealer.

About this manual

The instructions in this manual are for SA-VE525,
Sony Micro Satellite Systems.

The SA-VE525 is a 5.1 channel speaker system
consisting of two front speakers, two rear speakers,
one center speaker, and one subwoofer.  It supports
Sony Digital Cinema Sound, Dolby* Pro Logic, and
Dolby Digital and is thus gearedtowards the
enjoyment of movies.

* Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.

Micro Satellite System

SA-VE525

4-233-674-

61

(1)

 WARNING

To prevent fire or shock hazard, do not expose the
unit to rain or moisture.

To prevent fire, do not Cover the ventilation of the
apparatus with news papers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place vases on
the apparatus.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.

Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.

Center

中央

Center

中央

3.5m

3.5m

3.5m

3.5m

3.5m

3.5m

2.5m

2.5m

10m

10m

10m

10m

 中文

联结系统

将扬声器系统连接到一个放大器的扬声器输出端子。
开始连接工作前,必须先关掉所有装置(包含副低音扬

声器)的电源。

A

 式联结

这个配置是用于放大器连接了 DVD 播放机、LD 播放

机、录影机或其它视频装置时的用途。

B

 式联结

如下状况时,可试用此配置代替“

A

 

式联结”:

当放大器上没有副低音扬声器用的插孔时。

当想获得较强的,来自副低音扬声器低音时。

注 (

C

须确认扬声器上的 (+) 和 (-) 端子是否符合放大器上相
当的 (+)、(-) 端子。

一定请系紧扬声器端子的螺钉。因为螺钉松了,可能发生
噪声。

确认所有的连接部分是否都连接得稳固。扬声器各端子间
的扬声器裸线部分相接触时,可能引起短路。

不要把副低音扬声器连接到放大器的 CENTER(中央)输
出端子(杜比专业逻辑或杜比数码用)。如果这样做,副
低音扬声器将不能输出低音。

放大器一边的连接有关详细,请参照放大器附带的说明
书。

要领

所有具有条纹线皮的电线都是负 (-) 极,须连接到负 (-)
的扬声器端子。

使用前须注意

安全须知

操作系统之前,一定请先确认系统的操作电压是否与当地
的电源电压一致。

机器只要是电源线仍接插在墙上电源插座,则即使关掉机
器上的电源开关,机器仍并没有完全断开 AC 主电源的。

准备长期不使用系统时,请自电源插座拔下系统的电源
线。要卸下电源线时,必须抓住插头拔下,不可拉着电源
线的导线部分拔。

万一有任何液体或杂物掉进系统里面时,即请自电源插座
拔下系统的电源线并找持有资格的人检查过以后才可再接
电使用。

要更换 AC 电源线时,必须找持资格的维修店为您服务。

操作须知

不要连续地用超过系统的最大输入功率驱动扬声器系统。

扬声器接线电极如果没有连接正确,低音将显得微弱而各
种乐器的位置也显得模糊不清。

扬声器各端子间的扬声器裸线部分相接触时,可能引起短
路。

连接系统之前,须关掉放大器电源以免损坏扬声器系统。

如果靠近的电视机荧幕遭遇彩色不均时

本扬声器系统为磁屏蔽型设计,可以装在电视机旁。但

某些型式的电视机仍可能发生彩色不均的问题。

如果发生彩色不均…

c

即请关掉一下电视机电源,然后在 15 到 30 分钟之后
再打开电源。

如果又发生彩色不均现象…

c

即把扬声器移离电视机远些放置。

如果发生啸声

请重新配置扬声器,或转小放大器的音量。

安放须知

不要把扬声器放置在倾斜位置。

不要把扬声器装在如下位置:

太热或太冷的地方

极多尘垢的地方

极潮湿的地方

会受振动的地方

会直接照射到阳光的地方

清洁须知

请用软布轻蘸湿温和的洗涤剂溶液或清水擦拭机壳。切

勿使用任何型式的沙布,抛光粉或如酒精,汽油等溶剂进行
清洁。

关于扬声器系统,如果尚有疑问时,请洽询附近的

Sony 销售店。

关于本说明书

本说明书用于说明 SA-VE525 Sony 微型卫星系统。

SA-VE525 是含有两个前扬声器,两个后扬声器,一个中
央扬声器和一个超低音扬声器的 5.1 声道扬声器系统。
提供  Sony  数码电影院音响  (Sony  Digital  Cinema
Sound),杜比*专业逻辑和杜比数码功能,而供您用于享
受电影的音响。

经杜比实验室授权生产。

“杜比”, “Dolby”, “Pro Logic” 和双 D 标志是杜比实

验室的商标。

 警告

为防火灾或触电危险,请勿让机器暴露于雨中或潮湿处。

为防止火灾,请勿用报纸、桌布、窗帘等覆盖本装置的

通风口。请勿将点燃的蜡烛放在本装置上。

为防止火灾或电击的危险,请勿在设备上放置装满液

体的物品,例如花瓶。

为免遭触电,请勿擅自打开机壳。维修限请找持有资格

者为您服务。

不要把装置安装在诸如书橱或壁橱等密闭的地方。

Reviews: