Operating Instructions
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
• Use your product only with the AC adapter supplied with your personal
computer.
• To disconnect it completely from the main voltage, unplug the AC adapter.
• Make sure that the socket outlet is easily accessible.
For customers in the USA
Owner’s Record
The model number and serial number are located on the bottom of your
port replicator. Record the serial number in the space provided here. Refer
to the model and serial number when you call your Sony Service Center.
Model No. VGP-PRUX1
Serial No. ——————————
WARNING
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference using one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Only peripherals (computer input/output devices, terminals, printers, etc.)
that comply with FCC Class B limits, may be attached to this computer
product. Operation with non-compliant peripherals is likely to result in
interference to radio and television reception.
All cables used to connect peripherals must be shielded and grounded.
Operation with cables, connected to peripherals, that are not shielded and
grounded, may result in interference to radio and television reception.
If you have any questions about this product, you can reach the Sony
Customer Infomation Service Center at 1-888-476-6972 in the United States
or 1-800-961-7669 in Canada; or write to the Sony Customer Information
Service Center at 12451 Gateway Blvd, Ft. Meyers, FL 33913, or find Sony
Customer Service on the Web at
http://www.sony.com/pcsupport.
Declaration of Conformity
Trade Name:
SONY
Model No.:
VGP-PRUX1
Responsible Party:
Sony Electronics Inc.
Address:
16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.:
858-942-2230
(This phone number is for FCC-related matters only.)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• VAIO and
are trademarks of Sony Corporation.
• i.LINK is a designation referring to IEEE 1394-1995 and IEEE 1394a-2000.
i.LINK and the i.LINK logo “ ” are trademarks of Sony Corporation.
Before use
Before using the port replicator, please read this manual thoroughly and
retain it for future reference. See also the manuals provided with your
personal computer for more information about connecting the port
replicator.
The Sony VGP-PRUX1 port replicator is designed for Sony personal
computers. However, it may not be used with some models.
2-694-689-
12
(1)
Port Replicator
VGP-PRUX1
Printed on 70% or more recycled paper using VOC
(Volatile Organic Compound)-free vegetable oil based ink.
© 2006 Sony Corporation / Printed in Japan
S400
Continue to next page
