background image

– 1 –

MICROFILM

SERVICE MANUAL

US Model

WM-FX271/FX275

Canadian Model

AEP Model

E Model

Chinese Model

WM-FX271

WM-FX271/FX275

RADIO CASSETTE PLAYER

Photo: WM-FX271

Frequency range

FM: 65 – 74/87.5 – 108 MHz (East European)

87.5 – 108 MHz (Except East European)

AM: 530 – 1,710 kHz (US, Canadian)

531 – 1,602 kHz (Except US, Canadian)

Power requirements

3 V DC batteries R6 (AA) 

×

 2/External DC 3 V power sources

Dimensions

91.4 

×

 115.5 

×

 35.9 mm (3 

5/8

 

×

 4 

5/8

 

×

 1 

7/16

 inches) (w/h/d) incl.

projecting parts and controls

Mass

Approx. 150 g (5.3 oz.)
Approx. 230 g (8.2 oz.) incl.batteries and a tape

Supplied accessories

Stereo headphones or Stereo earphones (1)/Carrying case (1)

Design and specifications are subject to change without
notice.

SPECIFICATIONS

Model Name Using Similar Mechanism

WM-FX171

Tape Transport Mechanism Type

MF-WMFX171-114

Flexible Circuit Board Repairing

Keep the temperature of the soldering iron around 270˚C during
repairing.

Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).

Be careful not to apply force on the conductor when soldering
or unsoldering.

Notes on Chip Component Replacement

Never reuse a disconnected chip component.

Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.

Ver 1.0  1999. 02

Summary of Contents for Walkman WM-FX271




























Reviews: