XDR-V20D [GB] 4-691-621-
11(1)
Listening to a preset station
Note
To avoid changing the preset accidentally,
do not hold down the preset button.
Presetting stations (5 DAB and 5 FM)
1
Tune to the station you
want to preset.
Follow the steps in “Listening to
the Radio” above.
2
Press and hold the desired preset button (
1–5) until “Stored to [PRESET x].”
appears on the display.
Tips
• If you try to store another station with the same preset
number, the previously stored station will be replaced.
• The preset stations remain in the unit’s memory even after
an auto tune is performed.
• The preset button
3 on the unit has a tactile dot. Use the
tactile dot as a reference when operating the unit.
Example: Presetting a tuned station to the preset button 3
Listening to the Radio
Getting Started
Tip
To perform auto tune again later, see “To make a new
DAB/FM station list” below.
Example: When the preset button 3 is pressed
To DC IN
AC adaptor
(supplied)
The built-in battery will be fully charged (“
”) in up to
6 hours.
1
Select the “DAB” or “FM”
function.
2
Select the desired preset station.
1
Turn on the unit.
2
Select the “DAB” or “FM” function.
Station currently
being received
Secondary service (after the “L” mark)
Selected station
Scrolling text (DLS: Dynamic Label Segment
of up to 128 characters)
“SC” lights up when a secondary
service is received.
Station name*
Scrolling text
(RT: Radio Text of up to 64 characters)*
* Displayed only when RDS data has been received.
Wall outlet
After pressing
FUNCTION once,
you can also select a function
by turning the
TUNE dial and
pressing
ENTER.
Station currently
being received
Station name*
To improve DAB/FM radio reception
To make a new DAB/FM station list
If you have moved to another region, perform DAB and FM auto tunes again.
Select the “DAB” or “FM” function, then press
AUTO TUNE.
Notes
• The currently stored station list will be cleared once the auto tune
process starts.
• When the setting menu is displayed, auto tune will not be
performed even if
AUTO TUNE is pressed.
The unit receives the first
station in the new station list.
The unit receives the first
station in the new station list.
Press repeatedly.
1
Connect the unit to a wall outlet and charge
the unit.
2
Extend the antenna.
3
Turn on the unit.
When using the unit for the first time, make sure to connect the unit to a wall outlet
using the AC adaptor (supplied). Otherwise, the unit will not turn on.
Selected station
Note
When adjusting the antenna, be
sure to hold it by the bottom
part. The antenna may be
damaged if you move it with
excessive force while holding it
by the upper part.
Listening to Music from an External Device
1
Connect the external device to the unit.
2
Turn on the unit.
Portable digital
music player, etc.
Audio connection cable
without resistor (not
supplied)
Stereo mini plug
2 rings
To AUDIO IN
3
Select the “AUDIO IN” function.
To turn off the unit
Setting the unit to standby mode
The unit switches to standby mode and the clock
appears on the display.
Turning off the power completely (Off mode)
Press and hold
for
about 2 seconds.
Power to the unit is shut off and the display goes
blank. Set the unit to off mode when you are not using
it to save power.
To adjust the volume
Tips
• The last set volume is stored in the unit’s memory.
•
VOL + on the unit has a tactile dot. Use the tactile dot as
a reference when operating the unit.
To adjust the volume
Select the appropriate volume on the connected device
and then adjust it on the unit using
VOL + or − buttons.
See “Setting Menu Options” for manual tuning.
About the FM auto tune process
You can cancel the FM auto tune process that starts
after the FM function is selected for the first time.
However, if you want to tune to stations by station list,
you will need to perform FM auto tune.
For details on how to perform FM auto tune later, see
“To make a new DAB/FM station list.”
To cancel the auto
tune process while
in progress, press
BACK.
When turning on the unit for the first time
DAB auto tune will start automatically when the unit is turned on for the
first time. After DAB auto tune is completed, the unit receives the first
station in the DAB station list stored by DAB auto tune. If you want to
cancel DAB auto tune process, press
BACK.
4
Start playback on the connected device.
3
Select the desired station or service.
Note on FM auto tuning
Be sure to select “By station list” in “FM tune mode” before
starting FM auto tune. When “Manual tune” is selected, scan tuning will
start instead. See “Setting Menu Options” for details.
To cancel the auto
tune process while
in progress, press
BACK.
When selecting the FM function for the first time
FM auto tune will start automatically when the FM function is
selected for the first time.
Tips
• Even if you select “Later” on the “Get FM station name” screen, FM station
names will be received and stored in the unit while you are listening to
broadcasts.
• FM station names may not be transmitted, depending on the station.
Press repeatedly.
The unit automatically
switches to the
selected function
after about 2 seconds.
After pressing
FUNCTION once,
you can also select a function
by turning the
TUNE dial and
pressing
ENTER.
Press repeatedly.
The unit automatically
switches to the selected
function after about 2
seconds.
DIGITAL RADIO DAB/FM
Operating Instructions
©2017 Sony Corporation Printed in China
4-691-621-
11(1)
XDR-V20D
