background image

User Manual 

PRODUCT #: 

LE04

ITEM:

Pro Salon Spa Table from Living Earth 
Crafts 

BRAND:

Living Earth Crafts 

SOURCE FOR PURCHASE:

SpaEquip Inc. 
211 Wappo Ave 
Calistoga, CA 94515 
(707) 737-1100 
www.spaequip.com 

FEATURES: 

This Pro Salon model features full electronic control of table height, head panel and leg panel tilts. It incorporates the 
LEC Quiettech motor/hydraulic system that is smoother, quieter and more reliable.   Includes an 8-button hand control, 
heavy duty foot pedal, Strata 4" Memory Foam with rounded corners, hard maple wood construction with louvered 
cabinet, and half round neck roll.  Choose from a variety of base cabinet styles - the base cabinet includes a power outlet 
and can accommodate a hot towel cabinet or other electrical device. ADA compliant with low height range. Some models 
shown here with Stain, Flexible Armrest and Manicure Arms upgrades. PivotPerfect Side Arms or Manicure Arms 
upgrade available in 30" and 32" widths only. Lifting capacity is 650 lbs.  Oversized item - ships by Truck. 

SPECIFICATIONS:

Dimensions: 

 

73"(185cm) L x 30"(76cm)W x 25 - 37" (63-94cm)H; also available in 28"(70cm) or 32"(81cm) 

 

 

 

widths.  Base Cabinet is 51"L x 25.5"W 

Electrical: 

 

110V AC, 2.4 Amps 

Suggested Outlet: 

Recessed Quad Outlet under table, not to exceed 2" High 

Plumbing:   None 
Notes: 

  None 

Warranty: 

LET:Limited lifetime warranty on the frame. 3 years on foam and vinyl. 2 years on motors & 

 controls 
Certifications: 

UL, cUL, CE 

Country of Origin: 

United States 

Installed By: 

SpaEquip (if setup is included with order) or Client 

Product Code: LE04X

www.spaequip.com

P: 707-737-1100 F: 707-737-1150

Page 1 of 15

Summary of Contents for LE04
















Reviews: