1 / 4
03809*
(2x)
(For Latch/
Strike Bag)
If drilling a new door, use the supplied template and the complete
door drilling instructions available at kwikset.com/doorprep
1-3/8" –2"
35 – 51 mm
A
B
C
D
Extend the latch bolt.
Is the D-shaped hole centered in the door hole?
Install the latch.
Hold the latch in front of the door hole, with the latch
face flush against the door edge.
1"
25 mm
YES
NO
No adjustment is required.
Proceed to next step.
D-shaped hole
D-shaped hole
Rotate latch face as
shown to extend latch.
UP is on top.
E
Install the strike on the door frame.
Make sure the hole in the door frame is drilled
a minimum of 1" (25 mm) deep.
1
2
Prepare the door and check dimensions
Install the latch and strike
or
2-3/8" or 2-3/4"
60 or 70 mm
backset
Measure to confirm that the backset is
either 2-3/8" or 2-3/4" (60 or 70 mm).
Measure to confirm that the hole
in the door edge is 1" (25 mm).
Measure to confirm that the door is between
1-3/8" and 2" (35 mm and 51 mm) thick.
Remove your existing deadbolt
from your door.
C
D
E
F
B
Latch A
“B” is not included.
If needed, please contact
Kwikset to order a drive-in
latch for your lock.
Keys
Exterior Assembly
Adapter
Ring
Batteries
Mounting
Plate
Parts List
For Latch / Strike
Interior Assembly
SmartKey
Tool
Measure to confirm that the hole in the door is either
2-1/8" (54 mm) or 1-1/2" (38 mm).
or
2-1/8"
54 mm
1-1/2"
38 mm
Note: Additional door
preparation may be
required for doors with
1-1/2" (38 mm) holes.
Consult the deadbolt
drilling instructions at
kwikset.com/doorprep
A
Make sure your door is compatible. If you have a standard deadbolt mounted
separately from the handle below it, your door is compatible.
Mortise
Lock
Not Compatible
Not Compatible
Rim
Lock
Compatible
Not Compatible
Integrated
Interior
door frame
46780*
(4x)
(For Latch/
Strike Bag)
*Install the longer screws
closest to the door jamb.
actual size
Strike
03809
46780
68272
69316
Latch B
For Lock
03809
46780
or
or
*Use longer screws if
holes are worn out.
You will have two extra screws.
actual size
For Latch /
Strike Bag
(2x)
(2x)
(2x)
(2x)
69369-00
3
Rev 0
4
Z-Wave Plus™
Installation and User Guide
Kwikset
1-866-863-6584
www.kwikset.com
ENGL
IS
H
Required tools
Ruler
Phillips head screwdriver
