0118583R4 Page 1 of 4
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Display Stand
37130
4mm Hex wrench
(included)
Tools Required
(1) 0119747
Monitor mount
(4) 0108896
1/4-20 Flanged
serrated locknut
(12) 052605
1/4-20 x 15mm
JC bolt
(1) 0118193
End cap 3” x 3”
(1) 0118510
Upright assembly
(1) 0131924
Upright bracket
Figure 1
Rubber thread
protectors
Bottom of upright
assembly
7/16” or Adjustable
wrench
(1) 025039
4mm Hex wrench
1. With the upright assembly upside-down, remove the rubber
thread protector from each threaded stud.
Figure 1
.
(A utility knife may be needed to cut off.)
(1) 0139729
200mm VESA
adapter plate
(4) 0106543
1/4-20 Keps nuts
Installation
