Congratulations on your purchase of a Speed Merchant
SpeedSpec 2 competition chassis.
This instruction manual will detail the specific steps involved to
build your new car. Make sure to take your time when building,
since even though there are very few parts in this kit, it is
important to make sure that everything is smooth (metal parts
such as kingpins, pivot balls, etc are polished, and that nothing
binds) and working the way they should. This will make
noticeable difference in the handling of the car out on the track.
Required tools and supplies:
.050” Hex driver
1/16” Hex driver
3/32” Hex driver
5/64” Hex driver
3/16” Nut driver
¼” Nut driver
3/32” Nut driver
File
Cyanoacrylate Glue
(CA or super glue)
35 Wt. Shock Oil (recommended)
Tube Spooge (damper tube lube)
1/8” and 3/32” Drill bits
82° countersink
Metal polish
Double sided tape (servo tape)
Ruler
Pen or pencil
Additional required parts:
540 sized electric motor
Electronic Speed Controller
Radio Transmitter
Radio Receiver
Servo (standard sized)
Servo saver
(to match servo brand)
4 Cell Sub-C size
NiMh or Ni Cad Battery
Tires and Wheels
Body shell
Paint for body shell
Speedspec2 - 0.0.2
