Speedaire
®
3/8" Mini Air
Ratchet
Speedaire 3/8" mini air ratchet wrench handles all types of repair or assembly
applications. This ratchet wrench is ergonomically designed for comfort and easy
use with high power for tough jobs.
Figure 1
Unpacking
Specifications
When unpacking the unit, carefully
look for any damage that may have
occurred during transit. Check for
loose, missing or damaged parts.
Maximum torque
Free speed (No Load)
Average air consumption
Maximum Air Pressure
Air inlet
Hose Size
Length
Weight
.......................18FT-LBS
............... 240 RPM
......... 2.53 CFM
.................. 90 PSI
...................................... 1/4" NPT
.................................. 5/16" I.D.
............................................. 5-1/2"
....................................... 0.94 LBS
Includes:
1 - Air Ratchet
WARNING
To reduce risk of injury, everyone
using, installing, repairing,
maintaining, changing
accessories on, or working near
this tool must read and
understand these instructions
before performing any such task.
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT
PROBLEMS. To help recognize this
information, observe the following symbols.
Safety Guidelines
Danger indicates an imminently
hazardous situation which, if not
avoided, WILL result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if
not avoided, COULD result in death or serious injury.
Caution indicates a potentially
hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
Notice indicates important
information, that if not followed,
may cause damage to equipment.
NOTICE
10D236
General Safety Information
1.
For Additional Safety
information Consult:
Your employer, union, and/or trade
association.
US Department of Labor (OSHA);
www.osha gov.
" Safety Code For Portable Air
Tools" (B186.1) available from:
www.ansi.org.
Entanglement Hazards
Keep away from rotating drive.
2.
3.
4.
Do not wear jewelry or
loose clothing.
Choking can occur if neck wear
is not kept away from tool and
accessories.
Scalping can occur if hair is not kept
away from the tool and accessories.
Avoid direct contact with
accessories during use.
Use only proper accessories
designed for use with pneumatic
screwdrivers, nutrunners, ratchets
and pulse tools.
Projectile Hazards
Be sure all others in area are
wearing impact-resistant eye
protection.
Even small projectiles can
injure eyes and cause
blindness or injuries.
Slip/Trip/Fall is a major
cause of serious injury
or death. Beware of excess hose left on the
walking or work surface.
with or near the operation, repair or maintenance of
the tool or maintenance of the tool or changing
accessories on the tool.
Always wear impact-resistant
eye protection when involved
Do not use hand sockets as they can
shatter. Use only power or impact
sockets in good condition.
Always use the simplest hook-up
possible. Long, springy extension
bars and adapters absorb power
and could break. Use deep sockets
where possible.
Never operate the tool off of the
work. It may run too fast and cause
the accessory to be thrown off the
tool.
Serious injury can result from over-
torqued or under-torqued
fasteners. Released
assemblies requiring a specific
torque must be checked using a
torque meter. Note: So-called
“click” torque wrenches do not
check for potentially dangerous
over-torque conditions.
Workplace Hazards
High sound levels can cause perma-
nent hearing loss. Use hearing
protection as recommended by your
employer or OSHA regulation (see
29 CFR part 1910).
Maintain a balanced body position
and secure footing.
Repetitive and exposure to vibration
can be harmful to hands and arms.
If numbness, tingling, pain or
whitening of the skin occurs, stop
using tool and consult a physician.
Always support the tool’s handle
securely, in the direction opposite
of the spindle rotation, to reduce
in Taiwan
5S6842
04634
STC100
06/11
#801
