GUARANTEE CERTIFICATE – For purchases made in the U.S.
If at any time within one (1) year from the purchase date of this
product, it fails to perform properly because of defects in material or
manufacturing, return it prepaid to:
E&B GIFTWARE, LLC, 585 Oak Ridge Road, Hazleton, PA 18202
Complete this Guarantee Certificate and enclose it (or a copy of it) with
the product.
(PLEASE PRINT CLEARLY)
NAME _____________________________________________________
TEL _______________________________________________________
ADDRESS __________________________________________________
CITY _______________________________________________________
STATE ____________________________________ ZIP _____________
STORE PURCHASED FROM ____________________________________
DATE OF PURCHASE ________________ PURCHASE PRICE __________
PROBLEM WITH PRODUCT ____________________________________
REPLACEMENT
This product has been carefully designed, manufactured and packaged.
If any parts are missing or damaged, please contact us at the address
above and we will replace the unit at no charge. (Guarantee does not
cover crystal or battery.)
For purchases made in the UK:
Should you experience problems with this item, please return it to the
point of purchase. This will not affect your statutory rights.
Alternatively return it to the address shown below for a
repair/replacement.:
StarCase (UK) Ltd, Berkeley Business Park,
Wainwright Road, Worcester WR4 9FA
#
4/26/06
SP3635IS01SP0RA
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at their
own expense.
IMPORTANT:
• Read this instruction manual thoroughly before operating
the unit.
• This unit is not a medical device. It is meant to provide a general guide
assisting you during workout. Please consult your doctor before
beginning any exercise program.
Contents
• How to Measure Your Heart Rate
• Helpful Hints in Measuring Heart Rate
• Features and Button Operation Overview
• Setting the Time
• Setting the Daily Alarm
• Turning the Daily Alarm ON/OFF
• Turning the Hourly Chime ON/OFF
• Using the Chronograph Feature
• Care and Maintenance
• Specifications/Battery
• How the Watch Works
While this watch works like a standard sports watch, it includes an
advanced heart rate sensing technology -
S-Pulse
™ - that provides
easy and accurate contact heart rate readings.
S-Pulse
™ is a patented heart rate sensing technology that measures
the electrical signals on your skin – in the same manner that an EKG or
electrocardiogram does.
While the Sportline Solo 900 Heart Rate Watch attaches to your wrist
like other watch products, it does not measure or sense your pulse at
your wrist. It instead uses
S-Pulse
™ technology to sense your heart
rate by measuring your EKG signal.
How to Measure Your Heart Rate
To get your heart rate reading, just follow these
simple steps:
1. Place the Sportline Solo 900 Heart Rate
Watch on your wrist, adjusting for a snug, comfortable fit.
2. Place your finger on the Sportline Solo 900 Heart Rate Watch’s
sensor, as shown, and press gently for 3-8 seconds.
Be sure to activate the Heart Rate mode by pressing the bottom metal
sensor so that the display flashes. It is best to use the flat ‘pads’ of your
finger, and not the fingertips.
3. A ‘beep’ will sound and your heart rate will be displayed.
It’s that easy!
Because the Sportline Solo 900 Heart Rate Watch is a sensitive
monitoring device that reads your EKG signals, reading times will vary.
If you don’t get a reading in 3-8 seconds, wait a couple of minutes and
try again. This gives the Sportline Solo 900 Heart Rate Watch a chance
to settle in and pick up your electrical signals.
Your heart rate will remain displayed once measured,
and will remain displayed for 7 seconds after you release
the sensor button.
• The Sportline Solo 900 Heart Rate Watch must be attached
to your wrist in order for the Heart Rate Measure function
to work.
• Proper finger pad contact is very important and affects the heart rate
reading time.
• For those users with dry skin, thick or calloused finger, low heart rate
signal strength (EKG strength), minimal padding
on your finger, or users located in dry environments, please see our
Helpful Hints section.
• The Heart Rate Measure function is not intended for use or operation
in or under water.
How to Calculate Your Maximum Heart Rate
• Deduct your age from 220 (220 - your age = your maximum
heart rate)
• Example of Relative Heart Rate
- Tom is 30 years old
- His heart rate measured at 132
- Maximum heart rate is 220 - 30 = 190 bpm
- 132/190 = 70% Relative Heart Rate
To learn more, log onto www.sportline.com
Helpful Hints in Measuring Heart Rate
If you are having difficulty measuring your heart rate, you may
want to try the following steps. Try each of these in order until you
successfully measure your heart rate:
1. Make sure the Sportline Solo 900 Heart Rate Watch is snugly
strapped to your wrist. A loose fit makes it more difficult to properly
measure your heart rate.
2. When pressing on the sensor, make sure that you are using the soft,
flat pads of your finger, not the tip of your finger.
3. Press gently with enough pressure to activate the heart rate
measure mode. Muscle ‘noise’ from pressing too hard can make it
difficult to measure your heart rate.
4. Make sure that the metal back of the Heart Rate Watch is laying flat
on your skin.
5. Make sure your wrist and finger are clean and free from dirt, oils, or
lotions.
6 Stay still, and relax your arms on a stable surface while taking your
heart rate.
7. Clean the front sensor and back metal plate with a mild
soap and water or similar cleaning solution.
8. Moisten with water the pads of the finger that you are using to
contact the sensor on the face of the watch.
9. Moisten with water the surface between the back metal
plate of the watch and the skin on your wrist.
Sportline Solo 900
Heart Rate Watch Features
and Button Operation Overview
1. Press the
MODE
button to
select the desired feature
mode. The Sportline Solo
900 Heart Rate Watch feature
modes (displays) are:
• Time
Set time, date, 12H/24H display mode, and
Button Beep ON/OFF.
• Alarm
Set alarm time, turn alarm ON/OFF, turn hourly chime
ON/OFF
• Chronograph
Run
chronograph
2. Once you have selected a feature mode, to change a setting in that
mode, hold the
MODE
button down for 2-3 seconds until the
display flashes.
When in ‘Button Beep ON’ mode (watch default), the Heart Rate Watch
will beep when the buttons are pushed.
3. Once flashing, to set a feature use the
ST/STP
(Start/Stop) button to
increase and
RESET
button to decrease the setting.
4. To move to the next setting, press and release the
MODE
button.
5. To save new settings after completion, hold the
MODE
button
down for 2-3 seconds until the display stops flashing.
Setting Time
1. While in the Time mode hold the
MODE
button down for
2-3 seconds until the display flashes.
2. The ‘seconds’ display will flash. In order, the settings to
enter will be:
•
seconds
•
minutes
•
hours
• 12Hr (am/pm) or 24Hr (military) time mode
• Button Beep ON or OFF (buttons beep when pressed
when ON, no beeping when OFF)
3. To set the feature, press the
ST/STP
(Start/Stop) button to increase
and
RESET
button to decrease the setting.
4. To move to the next setting, press and release the
MODE
button.
5. After all settings are entered, to save the new settings,
hold the
MODE
button down for 2-3 seconds until the display
stops flashing.
Setting the Daily Alarm Time
1. While in the Alarm mode, hold the
MODE
button down for 2-3
seconds until the ‘hour’ display flashes.
2. To set ‘hour’, press the
ST/STP
(Start/Stop) button to increase and
RESET
button to decrease the setting.
3. To move to ‘minutes’, press and release the
MODE
button.
4. After ‘hours’ and ‘minutes’ are set, to save, hold the
MODE
button
down for 2-3 seconds until the display stops flashing.
Turning the Daily Alarm ON/OFF
1. While in the Alarm mode, press the
ST/STP
(Start/Stop) button once
to turn the Daily Alarm ON or OFF.
2. When the Daily Alarm Indicator appears, the daily alarm is ON. The
Watch will start beeping at the designated alarm time for 30
seconds. To stop the beeping early, simply press any button (except
the
LIGHT
button).
Turning the Hourly Chime ON/OFF
1. While in the Alarm mode, press the
RESET
button once to
set the hourly chime ON or OFF.
2. When the Hourly Chime Indicator appears, the hourly chime is ON,
and the Watch will beep at the top of each hour.
Using the Chronograph Feature
The Chronograph feature measures elapsed time from a
zero starting point. The maximum counting range of the chronograph
is 99 hours, 59 minutes and 59 seconds.
To use the Chronograph, press the
MODE
button to select the
Chronograph mode. The Watch can now be used to record an elapsed
length of time.
1. Press the
RESET
button to reset counter to ‘0’.
2. Press the
ST/STP
(start/stop) button once to start timing.
3. Press the
ST/STP
(start/stop) button to stop timing.
4. To reset the chronograph to '0' press the
RESET
button.
Care and Maintenance
To ensure proper function of your Sportline Solo 900
Heart Rate Watch:
• Avoid rough usage or severe impacts to the Watch
• Keep the front sensor and back metal plate free from dirt, oils, or
other contaminants.
• Periodically clean the Watch, using a soft cloth, with a mild soap
and water or similar cleaning solution.
• Keep the Watch out of extreme heat or cold.
• Do not expose the Watch to intense direct sunlight for
long periods of time.
• Do not expose the Watch to chemicals such as gasoline, alcohol, or
solvents.
Specifications
Current Time Mode
• Hour, minute and second
• Month, day, day of week and year
• 12 / 24 hour format selectable
• Month-day/Day-month selectable
• Auto calendar from year 2000 to 2099
• Hourly Chime on the hours
Heart Rate Alert Mode
• Measuring range: 43 to 200 beats per minute
• Heart Rate Alert (upper and lower limit)
Daily Alarm Mode
• Daily Alarm: 1 daily alarm
• Alarm Duration: 30 seconds
Chronograph Mode
• Resolution: 1/100 second
• Counting range: 99 hours, 59 minutes, 59 seconds
• Measuring mode: Elapsed time
• Electro-luminescent/EL backlight
• Water resistant to 30 meters
The Sportline Solo 900 Heart Rate
Watch
function is not intended for use
or operation in or under water.
Battery
Battery replacement will be required from time to time,
and should occur when:
• The display fades in part or completely
• The Heart Rate function will not activate
To replace the battery of your Sportline Solo 900 Heart Rate Watch,
we recommend that this be done by a watch repair service center.
This will ensure that the water resistance will be retained after battery
replacement.
The Watch uses the standard lithium replacement battery: 2025
NOTE
• Non-rechargeable batteries are not to be recharged
• Rechargeable batteries must be removed before recharging
• Rechargeable batteries only to be recharged under adult
supervision
• Different types of batteries must not be mixed
• New and used batteries not to be mixed
• Exhausted batteries to be removed
• Do not dispose of battery in fire; battery may explode
or leak
• Do not dispose of product in fire; battery may explode
or leak
How the Sportline Solo 900 Heart Rate Watch Works
It is useful to understand the basics of how the watch’s
S-Pulse™
sensing technology works – as it will perform differently on
people of different age, skin type, body type,
EKG or electro-cardiogram signal strength, among others.
The S-Pulse™ technology measures the electronic signals that pass
through your body – that result from the beating of your heart. Many
are familiar with the EKG waveform – from either personal experiences
while at the hospital, or from popular television medical shows. It is
this same signal that passes through your body that S-Pulse™
measures.
This measurement is obtained by the Watch’s 2 metal sensors. The
back metal plate of the Watch wrist is actually a primary sensor that
measures these electronic signals off your arm.
The ‘EKG’ measurement is done when you place your finger from one
hand on the top sensor on the Watch that is attached to your opposite
arm. This creates a loop across your body
that the Watch can now read.
The Sportline Solo 900 Heart Rate Watch must be attached to your
wrist in order for the
Heart Rate Measure function to work.
Patents
The Heart Rate Watch and
S-Pulse™
technology are a result of and
protected by the following patents:
US: 5,738,104 & 5,876,350
Europe: EPO 0861045B1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Solo 900
Heart Rate Watch
©2006 Sportline, Inc.
3635
© 2006 Sportline Inc.
Distributed by Sportline Inc.,
Hazleton, PA 18202
To learn more, log onto www.sportline.com
SP3635IS01SPORA
®
7:28
AL
7:28
AL
LIGHT
ST./STP.
RESET
MODE