MODE/RESET BUTTON
• Operating Mode: Scrolls through display modes.
• Press & Hold: Resets Activity Tracker data.
• Programming Mode: Decreases current value.
SET BUTTON
• Operating Mode: Press & Hold to enter the Programming Sequence.
• Programming Mode: Accepts the information being adjusted and
advances to the next setting.
+ BUTTON
• Programming Mode: Increases current value
2- REMOVING BATTERY INSULATOR TAB
3- BUTTONS AND THEIR FUNCTIONS
1- GETTING STARTED
Back cover
Congratulations on your purchase of a
SYNC™
Activity Tracker. The
SYNC™
Activity Tracker features highly advanced sensor technologies
that accurately measure your body movements when worn from multiple
locations on the body and in multiple orientations. In addition, the built-
in audio jack technology allows you to easily upload your data to any
compatible smartphone or tablet through the MapMyWalk
™
smartphone
application. Please visit
www.syncactive.com/compatibility
for a
complete list of compatible devices.
Downloading the MapMyWalk
™
Application:
In addition to the Activity Tracker you have purchased, you will also need
to download the MapMyWalk
™
application for FREE on to your compatible
smartphone or tablet and create a user account.
For a complete tutorial regarding downloading, installing, and using the
MapMyWalk
™
application, please visit:
www.syncactive.com/tutorial
CUSTOMER SUPPORT
If you have questions, comments or need assistance with your device
please feel free to contact Customer Support by calling
1-866-694-4575
.
To activate your Activity Tracker after purchase, you must remove the
battery insulator tab inside the battery compartment.
1.
Locate the tab on of the Activity Tracker .
2.
Firmly grasp the tab and pull away from the Activity Tracker until com-
pletely removed from the unit.
3.
The unit will now be activated and the screen will be on.
Fold 1
Fold 2
Fold 3
Fold 3
Fold 4
4- PROGRAMMING THE ACTIVITY TRACKER
5- OPERATING THE ACTIVITY TRACKER
The Activity Tracker automatically begins capturing data once
movement occurs. There are no Start or Stop buttons to push.
Scroll through display modes by
PRESSING
the
MODE/RESET
button on the front of the unit.
TO CLEAR ALL CURRENT ACTIVITY TRACKER DATA:
1.
PRESS & HOLD
the
MODE/RESET
button on the front of the unit.
2.
Continue holding as the display reads “RESET”.
3.
When Activity Tracker data reads zeros (O),
RELEASE
the
MODE/
RESET
button. The unit is now ready for a new workout.
NOTE:
Your personal profile settings will be saved.
WWW.SYNCACTIVE.COM
SPORTLINE® AND SYNC™ ARE TRADEMARKS OF SPORTLINE,
A DIVISION OF EB SPORT GROUP, HAZLETON, PA 18202
MAPMYWALK® IS A REGISTERED TRADEMARK OF MAPMYFITNESS, INC.
DISTRIBUTED IN THE UK BY
EB BRANDS (UK), WORCESTER, WR4 9FA
ALL RIGHTS RESERVED. ©2013
WV3728IS01SYN
1.
Enter the Programming Sequence by
PRESSING & HOLDING
the
SET
button on the back of the unit for approximately 3 seconds.
2.
Adjust the value of each of the settings shown by
PRESSING
the
+
button
to increase or
MODE
button to decrease. Press
SET
to confirm.
3.
When prompted for stride length, this activity tracker has an automatic
stride length calculator that sets your length based on your height.
PRESS
the
SET
button to accept this value or you can adjust your Stride Length
(see “Determining Stride Length” on the back page) by
PRESSING
the
+
or
MODE
buttons.
4.
SAVED
will be displayed on the final press of the
SET
button. The unit is
now programmed and ready for use!
HOLD
SET
FOR
3 SECONDS
SAVE
12/24 HOUR FORMAT
STRIDE LENGTH
HOUR
HEIGHT
MINUTE
PREFERRED UNIT OF
MEASURE
MONTH
WEIGHT
DAY
YEAR
PRESS
+
OR
MODE
TO ADJUST VALUE, PRESS
SET
TO ADVANCE TO CONFIRM
USER GUIDE
/INSTRUCTION MANUAL
ALL DAY ACTIVITY TRACKER
SYNC
DISTANCE
CALORIES
INCREASE VALUE OF
CURRENT SETTING
HOLD TO ENTER SETTINGS
PRESS TO CONFIRM
CURRENT SETTING &
ADVANCE TO THE NEXT SCREEN
DECREASE VALUE OF
CURRENT SETTING
PRESS
MODE
BUTTON TO
CHANGE SCREENS
MODE/RESET
SET
+
