Quick start guide
Action video
camera
Models:
XCEL 4K
XCEL 1080
& comparable
User manual, latest firmware & FAQ
available at: support.spypoint.com
tech@spypoint.com
v1.2
1-888-779-7646
In the box
*
Components
Note:
Memory cards and additional mounts are sold separately.
Quick start
guide
Status LED
Lens
Microphone
MicroSD Slot
Micro-USB port
HDMI port
Screen
Select / Shutter Button
Power / Mode Button
Up Button
Speaker
Down Button / WiFi
Battery case
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
5
Note
: The XCEL mount adaptor is designed to attach securely and
adequately to the anchorage system of the camera and
resist to activities with impact.
Time Laspe
Your camera will shoot a series of photos at set
time intervals. The camera will initates a count
-
down and emit a camera shutter sound each time
a Photo is taken.
Settings
Adust camera settings, resolution and more.
CapturiNg Video + photos
to start/stop Video:
If the
Video mode icon on your camera’s LCD screen is not showing,
press the
power/Mode Button
repeatedly until it appears.
Press the
shutter/select Button, the camera will emit one beep and
the Camera will start recording. The camera Status LED will flash while
recording. Press the
shutter/select Button
again and the camera
will emit one beep to indicate recording has stopped.
to start/stop photos:
If the
photo,
Burst photo or time Lapse icon
on your camera’s
LCD screen is not showing, press the power/Mode Button
repeatedly
until the mode you want appears.
Press the
shutter/select Button to take a picture. The camera will
emit a camera shutter sound each time a
photo is taken. If in TiMe
Lapse
, press the
shutter/select Button to stop taking pictures.
iNstaLLiNg the QuiCk reLease staNd
turNiNg oN the CaMera
To turn
oN
the camera, press the
power/Mode Button
.
To turn
oFF
the camera, press and hold the
power/Mode Button
a
few seconds until the screen shuts down.
CyCLe through the Modes
You can cycle through the camera modes with the power/Mode Button
.
Vidéo
Record a Video.
Photo
Capture a single photo.
BurstPhoto
Your camera will take 3 photos in 1.5 seconds.
Quick release
stands
2x Lithium-ion
Polymer battery
Lens cleaning
cloth
USB cable
8
13
11
12
6
4
Flat adhesive mount
USB power adaptor
Bow mount
Scope mount
Leash
iNsertiNg the MiCrosd Card
Insert a microSD memory card in the card slot, gold contacts facing the
front of the XCEL. The card is inserted correctly when a click is heard.
reMoViNg the MiCrosd Card
Lightly press the memory card into the camera once to pop it out of
the slot and remove it.
ChargiNg the CaMera
The camera can be charged with:
1. A wall socket by using the USB power adaptor
2. A USB power source (e.g. a computer)
To charge the battery:
1. Connect the camera to a USB power source.
(Charging time: 4 hours)
exterNaL power sourCe For exteNded use
While using the camera, an external power source can be used to pro
-
vide continuous power and allow a longer autonomy period. All of the
power sources shown can be used to power the camera continuously
during use.
Getting started
Note
: The card must have a minimum rating of Class 10 or UHS-1,
and a capacity up to 64GB (not included). See the
AVAILABLE
ACCESSoRIES section.
13
9
10
7
* Mounts & accessories
may differ across comparable models.
Refer to website or packaging for full details
