Personal Safe
Instructions
CONTROL FEATURES
1.
Key lock
2.
Red indicator light
3.
Green indicator light
4.
Combination buttons
5.
Reset button (inside safe)
6.
Battery Compartment (inside safe)
Record the serial number from the tag on the door front.
Record your combination number.
Keep keys in a secure place away from children.
DO NOT store keys or your combination in the safe.
Serial #:
Your Combination #:
GETTING STARTED
When you first receive your safe you will need to open the door with the key in order to install the batteries. Batteries are
included and are located inside the safe.
INSTALLING THE BATTERIES
Remove the shelf for better access to the battery compartment. Push the battery cover locking tab with a screwdriver to release the cover.
Install the (4) AA alkaline batteries as shown. Replace the cover by inserting the rear tabs in the slots and snapping the cover in place.
NOTE: If the batteries are low the red light will go on while the safe
is opening. Replace with 4 new AA alkaline batteries as shown.
NOTE: This key has also been provided in case you lose or forget your security code or the batteries run low. If you lose your key,
you may purchase a replacement key by referencing the serial number located on the front of the door. See section regarding
replacement keys for further information.
To open the safe, insert key into lock and turn clockwise until the door automatically opens. NOTE: You must turn the key back to
the locked position before you are able to close and lock the door.
40261-1101
12
1
