Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 18, 2019
Product Diagram (CONNLOCKPK)
Part
Function
1
Steel Cable Tether
• Tether
A/V Cables
to
A/V Adapters
2
Aluminum Ferrule
• Create a loop by routing the
Steel Cable Tether
through each opening
• Crimp to secure the
Steel Cable Tether
loop
3
Heat Shrink Tubing
• Shrink around the crimped
Aluminum Ferrules
Requirements
• Swaging Tool x 1
• (Optional) Heat Gun x 1
• (Optional) Wire Cable Cutter x 1
For the latest requirements please visit:
www.startech.com/CONNLOCKPK
.
Installation
1. (Optional) Thread the
Heat Shrink Tubing
onto the center of the
Steel Cable
Tether
.
Note:
This step is necessary if you plan to utilize the
Heat Shrink Tubing
.
2. Thread the
Aluminum Ferrules
onto each end of the
Steel Cable Tether
.
3. Wrap one end of the
Steel Cable Tether
around the
A/V
Cable
.
Connectivity Lock - Steel Cable Tether
4. Route the working end of the
Steel Cable Tether
back into the second hole in the
Aluminum Steel Ferrule
.
5. Cinch the
Steel Cable Tether
until it fits snugly around the
A/V Cable
.
Note:
Do not cinch the
Steel Cable Tether
down all the way. Cinch the S
teel Cable
Tether
until it is no longer possible to slip the loop over the connectors of the
AV
Cable.
6. Crimp the
Aluminum Steel Ferrule
in the appropriate fitting of a
Swaging Tool
.
(Figure 1)
Note:
It may be necessary to crimp the
Aluminum Steel Ferrule
a few times to create
a strong and circular shaped crimp.
7. Wrap the other end of the
Steel Cable Tether
around the cable portion of the
A/V
Adapter
.
1
2
3
Figure 1
