1
SW-3023
Manual
Introduction
：
SW-3023 is a USB 3.0 to dual-SATA hard drive enclosure. It supports simultaneous access of two 2.5” or
3.5” SATA hard disk for both data read and data write. It is also backward compatible with USB 2.0 and USB
1.1. The maximum transfer speed of USB 3.0 can reach 5Gbps. The actual transfer speed of SW-3023 is
depends on HDD/SSD.
SW-3023 supports
Flash Copy, Offline Clone, Online Clone, Security Erase
, which is able to copy data
and system files from Source HDD to Target HDD
twice faster than other similar product
. SW-3023 provides
high storage capacity, high data transfer rate, and best data protection.
Function Chart
：
8
9
10
6
7
5
1
3
2
4
1
、
Power indicator.
2
、
Bay ‘1’ HDD read/write access indicator.
3
、
Bay ‘2’ HDD read/write access indicator.
4
、
Clone processing 25%, 50%, 75%, 100% indicator.
5
、
Clone button.
6
、
Bay ‘1
7
、
Bay ‘2’
8
、
USB3.0 input
9
、
Power switch (ON/OFF)
10
、
DC input
Function
：
•
Complies with Gen2i/Gen2m of Serial ATA II Electrical Specification 2.6
•
Supports SATA II Asynchronous Signal Recovery (Hot Plug) feature
•
Complies with USB 3.0 Specification, USB Mass Storage Class, Bulk-Only Transport Specification
•
Supports USB Super-Speed/High-Speed/Full-Speed Operation
•
Supports USB2.0/USB3.0 power saving mode
•
Support auto-spin down after idle for 5 mins
•
Supports Dual LUN for USB2.0/USB3.0
•
One Touch clone function.
