ci-296
Page 1 of 2
REV 000
a
2002 STI-CO INDUSTRIES, INC., 11 Cobham Drive, Orchard Park, NY 14127-4187
Technical Support: E-mail:
techsupport@sti-co.com
Phone: 1-716-662-2680 Fax: 1-800-685-1122
Made in U.S.A.
Tactical Antenna
Field Portable Antenna Kit
MODELS: FPAK-1-CEL, FPAK-1-700
ASSEMBLY CONSIDERATIONS
This instruction set will guide you through the proper set up of the antenna included in your F.P.A.K.
STAND ALONE
The antenna has a magnetic base and can be used as a stand-alone system mounted on a metal surface, for
indoor operation. This antenna can be used with an optional tri-pod. (see pg 2)
Note:
This antenna does not require tools of any kind in the set-up. All operations are to be performed
by hand. This antenna requires no adjustment.
1. Connect the cable to the port at the base of the antenna. Place the antenna in its operating position.
2. When the antenna is suspended from a ceiling, tape off the cable approximately six inches from the
antenna base to prevent the antenna from being pulled down.
