background image

  1.  Read this manual carefully before starting assembly.

  Read each step completely before beginning

       each step.

  2.  Some smaller parts may be shipped inside larger parts.  Check inside all parts and cartons before 

       assembling or ordering parts.

  3.  

If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together.  

       Leave bolts slightly loose until you are instructed to tighten them.

  4.  Tools required for assembly:

  

Wrenches or adjustable wrenches (not provided) are helpful.

  5.

  To make assembly as easy as possible, place all parts of the table tennis in a cleared area and 

       remove the packaging material.  Organize all parts as per parts identifier in the assembly manual. 

       Do not dispose of the packing material until assembly is completed. 

  6.

  Avoid scratching table tennis top and metal tube parts during the assembly process.

  7.

  Assemble product on clean, level and flat surface.

  8.  Take time to correctly orientate parts exactly as per each assembly diagram.

  9.  Save this instruction in the event that the manufacturer has to be contacted for replacement parts.

O W N E R ’ S   M A N U A L

Please visit our website at: www.escaladesports.com

ON-LINE TROUBLE SHOOTING 

  

TECHNICAL ASSISTANCE

ON-LINE PARTS REQUESTS     FREQUENTLY ASKED QUESTIONS

ADDITIONAL ESCALADE  SPORTS PRODUCT INFORMANTION

R

Escalade  Sport products may be manufactured and/or licensed under the following patents.

6120397 , 5816957 , 5769744 , 5119741 , 4911085 , 4717157 , D460140 , D420563

Additional patents may be pending.  One or more of the listed patents and/or pending patents may cover specific product.

2019 Escalade  Sports

R

C

R

Please Do Not Return This Product To The Store!

Contact Escalade  Sports customer service department at:
Phone:      1-866-873-3528       Toll-Free!

Fax:       1-866-873-3533       Toll-Free!

E-mail:       tabletennis@escaladesports.com

R

READ ASSEMBLY, OPERATING AND SAFETY INSTRUCTIONS

CAREFULLY! AT LEAST TWO ADULTS ARE NEEDED TO PUT

THIS TABLE TOGETHER!

Thank you for buying our product. We try hard to ensure that our products are of high quality and free of problems, such as

Manufacturing defects or missing parts. However, if you have any problems with your new product, please 

DO NOT RETURN IT

TO THE STORE!

Mailing Address (correspondence only):

Escalade Sports

PO Box 889

Evansville, IN 47706

Be sure to write your model number and serial number here 

for future reference.  You can find these numbers printed on 

the bottom of the table.

MODEL NO.:

  T8576W/F

DATE CODE :

 CPSIA#2-T8576W/F-_______-SY

PURCHASE DATE : 

_______________________

Please provide model number and/or part number of the product and/or part when you call or write.   These numbers can be found on the

product, packaging, and/or in this Owner’s Manual.

CAUTION:

Summary of Contents for Play The Best T8576W/F













Reviews: