SX234R:
Parts Breakdown & Operating Manual
1
06/22/09
Operating Instructions • Warning Information • Parts Break down
Max. Free Speed ............ 18,000 RPM
Wheel Size .......................................3"
Air Inlet ................................. 1/4" NPT
Air Supply Hose Size .............3/8" I.D.
Recommended Air Pressure ....90 PSI
SX234R
REVERSIBLE
3" CUT-OFF
TOOL
Average Air Consumption .... 3.6 CFM
Sound Level ............................ 87 dBA
Length ...........................................8.3"
Weight ..........................................2 LB
SPECIFICATIONS
AlwAys reAd
instructions
before using
power tools
AlwAys weAr
sAfety goggles
weAr heAring
protection
Avoid prolonged
exposure to
vibrAtion
rpM of cutting
wheel
MUST EXCEED
rpM of tool
(18,000 rpM)
some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
your risk from these exposures varies, depending on how often you do this
type of work. to reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
AVERTISSEMENT
AVERTISSEMENT
ADVERTENCIA
ADVERTENCIA
WARNING
WARNING
AVERTISSEMENT
AVERTISSEMENT
ADVERTENCIA
ADVERTENCIA
WARNING
WARNING
RPM
RPM
RPM
