background image

© 2019 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

A Division of Snow Joe

®

, LLC

Model 24V-X2-BVM143-LTE

Form No. SJ-24V-X2-BVM143-LTE-880E-M

R

OPERATOR’S MANUAL

CORDLESS  
MULCHER

48V MAX* | 4.0 Ah (2.0 Ah EACH) | 155 MPH MAX 

IMPORTANT!

Safety Instructions

All Operators Must Read These 

Instructions Before Use

Any electrical appliance can be dangerous if used incorrectly. 

Some of the safety precautions given in this manual apply 

generally to many appliances. Other warnings are specific to 

the use of this cordless blower vac.
Failure to follow all warnings, and instructions may result in 

electric shock, fire or serious injury.

m

WARNING!

 This indicates a hazardous situation, 

which, if not avoided, could result in death or serious injury.

m

CAUTION!

 This indicates a hazardous situation, 

which, if not avoided, could result in minor or moderate injury.

m

DANGER!

 This indicates a hazardous situation, which,  

if not followed, will result in death or serious injury.

General Safety

FOR HOUSEHOLD USE ONLY

Before using, be sure that everyone using this tool reads 

and understands all safety instructions and other information 

contained in this manual. Save this manual and review it 

frequently prior to using this tool and when instructing

others on the proper operating procedures.

m

CAUTION!

 Wear appropriate hearing protection during 

use. After long periods of extended use, the noise generated 

from this appliance may cause hearing loss if your ears are  

not properly protected.

m

WARNING!

 When using electric yard tools, basic 

safety precautions should always be followed to reduce  

the risk of fire, electric shock and personal injury, including 

 

the following:

1.  Keep work area clean and well-lit – Cluttered, dark 

areas invite accidents. 

2.  Replacement parts – When servicing this unit, use only 

identical replacement parts. 

3.  Disconnect the tool – Remove batteries from the 

blower vac when it is not in use, before servicing it, when 

changing accessories and when performing any other 

maintenance task.

4  Avoid dangerous environments – Do not use the blower 

vac in rain, damp or wet locations. Do not operate the 

blower vac in gaseous or explosive atmospheres or use 

the blower vac to pick up flammable or combustible 

liquids. Motors in these tools normally spark, and the 

sparks might ignite fumes.

5.  Keep children, bystanders and pets away – All 

spectators, including pets, should be kept a safe distance 

away from the work area.

6.  Use the right tool – 

Do not use the tool for any job except 

that for which it is intended.

7.  Check damaged part – Before further use of the 

appliance, a guard or other part that is damaged should 

be carefully checked to determine that it will operate 

properly and perform its intended function. Check for 

alignment of moving parts, binding of moving parts, 

breakage of parts, mounting, and any other condition 

that may affect its operation. A guard or other part that is 

damaged should be properly repaired or replaced by an 

authorized service center unless indicated elsewhere in 

this manual.

m

DANGER!

 

Do not manually place objects into the 

vacuum tube while operating the unit as this can seriously 

damage the unit and/or harm the operator. Keep both hands 

on the handles while the power is on.
DO NOT ATTEMPT to remove material or hold material to be 

vacuumed when the blower vac is on. Make sure the blower 

vac is off when clearing jammed material from the vacuum 

tube. Do not pick up the blower vac by the tube or attempt to 

carry the unit by the tube. 

m

CAUTION!

 Moving parts will continue to run for 

several seconds after turning off the machine.

8.  Moving parts – Keep hands and feet away from moving 

parts. Keep guards in place and in proper working order.

9.  Do not force the tool – It will perform better with less 

likelihood of personal or mechanical injury if it is used at 

the rate for which it was designed.

Summary of Contents for 24V-X2-BVM143-LTE





















Reviews: