The 2 straight bars (#5) and 2 fan & blower bars (#7)
should be spaced evenly on the upper frame to support
the ceiling (see diagram).
STEP 2
FAN BRACKET & 2 PHILIPS SCREWS
1 PIECE
Sun Hut Silver XL Assembly Instructions
NOTE: 2 people are needed to assemble the Sun Hut
Sun Hut Silver
XL 4X4
Product # 706805
600 & 1000 Watt
light systems used
in Sun Huts need to
be air cooled.
4 PIECES
1 PIECE
Screw hole for fan bracket
1 PIECE
1 PIECE
Screw hole for fan bracket
1 PIECE
4 PIECES
Separate numbered
poles. Assemble top
poles first. Insert two
#1 poles into #1 3-way
corner pole. The ball
bearing locks when
correctly connected.
See diagram for
connecting the poles.
STEP 1
Assemble bottom
corner poles (#8)
with bottom
connector poles
(#9) as shown
(see diagram).
STEP 4
STEP 3
Attach fan bracket into ceiling framing as shown. Tighten
4 screws (provided) into bracket (do not over-tighten).
4 PIECES
2 PIECES
CEILING GRID
BLOWER & FILTER RODS
2 PIECES
STEP 5
Attach top half
to the bottom
half to complete
the frame
(see diagram).
4 plastic ties for securing floor liner
12 bolts & wing nuts to attach flange
4 straps to secure blower & filter
2 FLANGES
2 FLANGE PLATES
