Thank you for choosing Sunnydaze Décor. If you have any questions, comments
or concerns please feel free to contact us by phone at:
888-881-4668
, by email:
customerservice@serenityhealth.com
, or you could also email us via our
contact us page at:
www.SerenityHealth.com/contact-us/.
We stand behind our brand and the quality of the items we sell. We will send
new parts, or replace products at our discretion within the one year warranty
period. Before we can help, you will need to provide proof of purchase with the
date of purchase and photos of the defective merchandise. We will use the
photos to determine the cause of defect and for future quality control.
USER’S MANUAL
1.
OVERVIEW
The solar pump is designed for fountain, pond or outdoor use,
design dry run protection prevents to protect
the pump from burning out when fountain, pond or pool dries out. In order to make the pump work, the solar
panel needs to be
in direct sunlight
This solar pump is designed with “solar powered” and “battery powered” mode. You can use this solar pump
almost day and night.
2.
ASSEMBLY
¾
Unpack all components carefully.
¾
Place the pump underwater and make sure that, it is
fully immersed
in water. Use the three flexible suction
cups to stick to the bottom of fountain pool. In case the pump tube is too far from the surface of water, you
can raise the pump by using stones or brick underlay.
¾
Connect fountain heads and LED light as required;
¾
Adjust the water jet as needed
¾
Install the 4pcs AA size rechargeable battery into the battery case.
¾
Connect the spike to the edge of the aluminum frame and place the solar panel under direct sunlight;
¾
Connect the pump cable to the socket of the control housing on the rear side of the solar panel;
¾
Connect the LED light cable to the socket of the control housing;
¾
Make sure the solar panel gets direct sun light.
