SOLAR PUMP KIT MANUAL
AMP-P001B1
Read this manual carefully before using this product and save this manual for future reference.
1. OVERVIEW
This kit is designed to operate only during daytime hours provided that the solar panel is receiving direct sunlight.
The solar-powered pump is intended for fountain, pond or outdoor use and was designed with dry-run protection to prevent the pump from
burning out if the fountain, pond or pool dries out. The pump derives its power directly from the solar panel. In order for the pump to operate, the
solar panel must be placed in direct sunlight. The performance of the pump depends on the season and the position of the solar panel.
2. ASSEMBLING AND USING YOUR PRODUCT
Carefully unpack all components.
Connect pump accessories to obtain performance for the intended use. Place the pump underwater, ensuring that the pump will remain submersed
during operation. For use with a water fountain, attach the pump directly to the fountain tubing; if the tubing is not long enough to allow the pump
to remain completely submersed in water, you may use flat stones or bricks to elevate the pump to the proper height.
Connect the pump cable to the solar panel and place the panel in full, direct sunlight avoiding areas that will become shaded during the day.
02/2019
AMP-P001B1
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase,
with the date of purchase as well as photos of the merchandise defect must be provided. Photos are used to the
cause of defects and for future quality control.
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
customerservice@serenityhealth.com
, or via our contact us page at
www.SerenityHealth.com/contact-us/
Page 1 / 2
3. PANEL PLACEMENT
Insert the spike into the ground. Position the solar panel to face South (in northern hemisphere) to make the most of daylight hours. It is important
to angle the solar panel towards the sun when sun is at its highest point. Ensure the solar panel is not shaded by trees, shrubs or buildings.
INCORRECT
CORRECT
