You will be using this
connector, found inside
once you open Zoey:
↑
CPA
P↑
↑
CPA
P↑
Push down
on the press
point until
it clicks and
opens lid.
Remove tube connector from
tray. Attach tube connector to
CPAP machine.
Do not attach to Zoey.
Disconnect CPAP tube from
your CPAP machine and mask
Before first time use, it is recommended to hand wash your CPAP equipment according to manufacturer's
instructions, as you would normally without Zoey. This removes debris, and prevents oxidation odors from
occurring in your CPAP equipment after running the Zoey cleaning cycle. When using Zoey regularly, you'll only
need to hand wash your CPAP equipment as needed.
2
3
3
4
3
8
7
6
9
10
11
12
5
Zoey
rear
corner
Click
Connect CPAP tube cuff all the way onto
Zoey's CPAP tube connector, in order
to press in and trigger the CPAP
tube sensor. The CPAP tube
sensor should be firmly held
in place by the CPAP tube cuff.
!
?
1
Instruction Manual
CPAP Cleaner
Additional resources
CleanWithZoey.com
/videos
How-to videos
CleanWithZoey.com
General information
Support@
CleanWithZoey.com
Email us with your
questions or feedback
Call
1-888-990-4385
Call us if you'd like to
talk to someone
Done!
When all three lights display solid
green, the cycle is complete and it is
safe to open Zoey. Remove CPAP tube
while lid is open to turn off lights.
This section
can remain
in place at all
times
—whether
you're cleaning with
Zoey or using
your CPAP.
Press the power button on Zoey to start cleaning cycle.
When the first light turns blue, you may walk away and
let Zoey clean. It is important to keep Zoey closed during
the entire cycle — normally 2 hours.
If three red lights are displayed, your CPAP tube may not
be triggering Zoey's CPAP tube sensor
(see step 10).
Also, ensure Zoey's lid is fully clicked shut.
Refer to the enclosed instruction
manual for troubleshooting and
more information
You may need an additional adapter if you
use a heated tube on your CPAP machine.
Visit
CleanWithZoey.com/adapters
for more info.
ZCD100 Quick Start Guide V 3.00
2020-08-04
Click
CPAP tube
sensor
Quick Start Guide
Option 1
Instructions for
Option 2
are on the flip side!
Option 2
Option 1
You'll also find
this adapter, but
you won't need it.
or...
Clean your:
1 CPAP machine
2 Mask
3 Tube
Clean just your:
1 Mask
2 Tube
1
1
2
2
3
You choose!
