®
Page
1
of
8
SECTION 03 35 43 Updated April 6, 2011
SECTION 03 35 43 - POLISHED CONCRETE FINISHING
InovaCrete® Polished Concrete Floor Finish
(GUIDE SPEC)
PART 1 GENERAL
1.01
SUMMARY
This Section includes information about:
A.
Polished concrete finish in accordance with InovaCrete
®
concept for
polishing concrete.
B.
All labor, material, equipment and services necessary for the diamond
grinding and polishing of concrete floors in accordance with the InovaCrete
®
concept.
C.
Applying densifying impregnator/sealer and polishing to specified sheen
level and aggregate exposure.
1.02
REFERENCES
A.
American Concrete Institute (ACI):
1.
ACI 117 - Standard Specifications for Tolerances for Concrete
Construction and Materials; American Concrete Institute.
2.
ACI 301 – Specifications for Structural Concrete for Buildings; American
Concrete Institute.
3.
ACI 302.1R – Guide for Concrete Floor and Slab Construction; American
Concrete Institute.
B.
American Society for Testing and Materials (ASTM):
1.
ASTM C 779 - Standard Test Method for Abrasion Resistance of
Horizontal Concrete Surfaces, procedure A.
2.
ASTM E 1155 - Standard Test Method for Determining F (F) Floor
Flatness and F(L) Floor Levelness Numbers; 1996.
3.
ASTM 1028 – Coefficient of Friction.
4.
ASTM C 805 – Impact Strength.
5.
ASTM G 23-81 – Ultraviolet Light & Water Spray.
6.
ASTM C 150 – Type I, II Portland Cement Conformity, depending on soil
conditions.
7.
ASTM C 33 – Aggregate Conformity.
