Superior Electronics AIRCO 6000, Instruction Manual

MANUAL: 

AIRCO 6000

ENGLISH

SUPERIOR AIRCO 6000 IN 1

Place two AAA (LR03) batteries as indicated on battery compartment. 
Your new remote control must point at air conditioner.

CODE SET UP BY BRAND
1. 

Find your code in the code table, for each brand if the chosen code does not operate your equipment,

try the second code and continue until your equipment works correctly. For instance for “AUCMA”, you
can choose code 0288, if it does not work, please try code 0289.

2.

 Press “SELECT” key, the displayed code flashes.

Enter 4 digit codes. For instance in order to enter code 0288, press “0”, when “0” stops flashing, press “2”,
“2”stops flashing, press “8”, “8” stops flashing, press the last “8”, “8” stops flashing, ending the code input,
setting is finished.

3.

 Point at the air conditioner, press “one key”, check if it works, if not, try another group until it works.

AUTOMATIC SEARCH

If the required brand is not listed in the code table, please operate as per following steps:

1.

 Point at your air conditioner, press the “SELECT” key for 5 seconds and then release it, remote control

enters the auto-search status, the code number flashes and code increases. When the air conditioner
receives the signal, and sends one buzzer, press any key to confirm.

2.

 Try other function keys, if they do not work, repeat above steps until it works properly.

USE OF ONE-KEY

Point at your air conditioner and press“one-key”. Your new remote control knows if it is summer or winter 
according to the temperature. In summer, the temperature will be set at 26 .Inwinter, the temperature will be 
set at 20°C.Use“TEMP+” or “TEMP-” to adjust the temperature.

CLOCK SET UP
1.

 Press the “CLOCK” key, time shall flash on display.

2. 

Press time “TIME+” or TIME-“, in order to adjust to the current time.

3. 

Press the “CLOCK” key again, it stops flashing, the time setting finishes.

If you do not press the “clock” key, it automatically stops after 5 seconds.

INSTRUCTION MANUAL

TIMER ON AND OFF

1. Press the “TM ON” button, time the LCD display flashes, Press “TIME+” “TIME-” button, adjust to the
required time, and it will confirm the time of turn on after 5 seconds.
2. Press the “TM OFF” button, time on LCD display flashes, Press “TIME+” “TIME-” button, adjust to the
required time, and it will confirm the time of turn off after 5 seconds.

NOTE:

- The time frame can be set between 00-24 hours
- Pressing keys“TMON”or “TMOFF” twice, cancels the timing.
- After setting the timer, point your new Superior remote control at your air conditioner.

ROOM TEMPERATURE DISPLAY

Press “ROOM TEMP”, display shall show it during 5 seconds

ATTENTION

1.

 If you are not planning to use your new Superior remote control remove the batteries to avoid leakage.

2.

 When the display looks dim, please change batteries. After the batteries are replaced set-up is 

not required again.

3.

 Check carefully that there are no objects between your new remote control and the air conditioner.

Mind that timer is effective only when the air conditioner receives the timer on/off signal from the 
remote control.

4.

 The manufacturer keeps the right to change any features and functions

TECHNICAL FEATURES

MAXIMUM REACH: about 8 meters 
(According to the A/C)
BATTERY MODEL: AAA Battery (LR03) ×2
DIMENSIONS: L133mm ×W45mm × D23mm
WEIGHT: Approx×52g (batteries excluded).

GUARANTEE

This product is covered by a 2 years guarantee from the date of purchase against any manufacturing defects,
exclusing any defects arising from improper use. A purchase document must be produced along with 
the request of repairing. Costs of return are at buyer’s expense.