background image

Symmons Industries, Inc. 

 31 Brooks Drive 

 Braintree, MA 02184 

 (800)796-6667 

■ 

Fax: (800)961-9621

©2014 Symmons Industries, Inc.

 www.symmons.com 

 gethelp@symmons.com 

■ 

 ZV-3051 REV 0 09/25/14

4103-TRM, 4105-TRM, 4106-TRM

Naru

 Trim Series

Operation & Maintenance Manual

Model Numbers

Specifications

  

4103-TRM 

Hand Shower Trim

  

4105-TRM 

Shower Trim with Hand Shower

  

4106-TRM

  

Tub/Shower Trim with Hand 
Shower

 

Tub/shower trim with hand shower and lever handle 
includes wall connection, cradle for hand shower 
mounting, in-line vacuum breaker, flexible metal hose, 
non-diverter tub spout, 3 mode hand shower and  
3 mode showerhead with standard 2.5 gpm (9.5 L/min) 
flow restrictor. Shower trim with hand shower and lever 
handle includes all of the above less non-diverter tub 
spout. Valve trim with hand shower and lever handle 
includes all of the above less non-diverter tub spout and 
3 mode showerhead. Components made from metal and 
nonmetallic materials plated in standard polished  
chrome finish.

Modifications

Compliance

  -1.5  

1.5 gpm (5.7 L/min) flow restrictor

  -2.0  

2.0 gpm (7.6 L/min) flow restrictor

 -412HSB   

30" slide bar in place of wall cradle on 
hand shower units

 -PNL 

Polished nickel finish

 -STN 

Satin nickel finish

-ASME A112.18.1; CSA B125.1

Warranty

Limited Lifetime

 - to the original end purchaser in  

consumer installations.

5 Years

 - for commercial installations.

Refer to www.symmons.com/warranty for complete  
warranty information.

Note:

 Append appropriate -suffix to model number.

c

Summary of Contents for The Smart Choice Naru Trim Series







Reviews: