Taco Comfort Solutions 0018e-SF4 Instruction Sheet Download

Page: 1 / 12

Instruction Sheet

102-565

SUPERSEDES: New
Plant ID No. 001-5025

EFFECTIVE: February 23, 2021

DESCRIPTION:

The 0018e® stainless steel is a variable speed wet rotor circulator with an ECM, permanent
magnet motor. Operating modes include infinitely variable fixed speed, constant pressure,
proportional pressure, and activeADAPT™ self-adjusting proportional pressure. Adjust the
operating mode with the dial or the Taco 0018e™ ECM Circulator Mobile App using Bluetooth®
connectivity on your smartphone or tablet. The ECM high-efficiency motor reduces power
consumption by up to 85% compared to equivalent AC permanent split capacitor circulators.

-1-

APPLICATION:

  •  Maximum operating pressure: 150 psi (10 bar)
  •   Maximum water temperature: 230˚F (110˚C)
  •   Electrical specifications:

Voltage: 110-120V, 50/60 Hz, single phase

Maximum operating power: 44W

Maximum amp rating: 0.54

• Equipped with a stainless steel casing with

4-bolt universal flanges or 1” union connections
• Use on open loop potable hot water recirculation

systems with up to 1000 feet of pipe or closed loop

    hydronic heating systems
  •  Not suitable for chilled water systems
  •   Taco circulator pumps are for indoor use only – employer uniquement a l’interieur
  •  Acceptable for use with water or maximum of 50% water/glycol solution

FEATURES:

• 3 operating modes in dial activation:
- Proportional pressure ( TRV - Panel Radiator ), variable speed - 2 variable

pressure differential settings (Med or High)
- Constant pressure ( ZV - Zone Valve ), variable speed - 2 constant pressure

differential settings (Med or High)
- Fixed speed ( ZONE CIRC - zoning with circulators ) - infinitely adjustable

    MIN/MAX settings
• 4 operating modes in 0018eTM Mobile App activation:
  -  Fixed Speed - infinitely adjustable MIN/MAX settings
  - Constant Pressure - variable speed - 9 constant pressure differential settings
  - Proportional Pressure - variable speed - 9 variable pressure differential settings
  -  activeADAPT™ - Designed for constant circulation systems.

Automatically adjusts to system conditions
• Multi-color LED display showing operating mode and error code diagnostics
• Nut capture feature on flanges for easier fit up
• Dual electrical knockouts and 6” stranded wire leads for easy wiring
• Double insulated - no ground-wire required
• Whisper quiet operation
•

SureStart®

- automatic unblocking and air purging mode

• 4-bolt universal flange or 1” union connection, stainless steel casing

- Optional 1/2” & 3/4” union fittings sets available - sweat, NPT or press (sold separately)
• Integral Flow Check (IFC®) included - Field installed

Stainless Steel, Variable Speed

High-Efficiency ECM Circulator

Figure 1:

Certified to

NSF/ANSI 61 & 372

Featuring Bluetooth® Communication

The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any