FPV-RM1
TM
Tactic’s 5.8GHz First Person View Wrist Monitor with integrated receiver is
intended for receiving video signals from a 5.8GHz FPV transmitter (available
separately) when mounted inside an R/C hobby model. Four bands with a total
of 32 frequencies in the 5.8GHz spectrum are available. For optimum results,
operate the system away from other 5.8GHz transmitters and in areas having
as few obstructions as possible between you and the Tx.
CONTENTS
(1) 5.8GHz FPV Wrist 2 inch Color Monitor with 32 Channels
(1) Micro USB Cable
(1) Instruction manual
It is strongly recommended to read this manual completely
before use! Damage resulting from misuse or modifi cation will
void your warranty.
INPUT POWER OPTIONS
CHARGING THE BATTERY:
This monitor includes a built-in circuit to recharge
the internal lithium polymer battery. Connecting an external 5V DC power source
to the monitor’s Micro USB jack will automatically start the charge process, as
indicated by the glowing red LED on the bottom edge of the watch. The LED will
turn off when charge is complete. Acceptable power sources include a computer
USB port or an AC USB adapter commonly used for cell phones. Item number
DIDP1125 Dromida AC USB Charger Adapter 2 Amp is also available through
local hobby retailers.
WARNING!
Charging lithium-polymer batteries poses a risk of FIRE! Follow
all care and handling instructions in this manual to avoid quick,
severe, permanent damage to the batteries and all surroundings
which could result from improper use and function.
