TAD Compact Reference
TAD-CR1 SPEAKER SYSTEM
Unpacking instructions
1. Cut the two packing straps on the outer carton, remove the “handle”-
shaped packing joints (four places), and cut open the top flap.
• To remove the packing joints, hold to the lever and pull outward.
UP
UP
Straps
Packing joints
Top flap
Tape
Lever
UP
UP
This speaker system is extremely heavy (46 kg, or 101.4 lb). Be sure to carry out unpacking
and installation with at least two people. Trying to handle too much weight can throw you
off balance, causing you to fall or otherwise incur bodily injury.
Read before removing your speakers from their packaging.
2. Using a screwdriver, remove the bolts and washers (six in all) from the
packaging and open and remove the outer carton.
Bolts
Outer carton
3. Remove the tape (six pieces in total) from the inner carton, and remove
the inner carton.
• After removing the inner carton and the top protector, take off the protective cover from the speaker system. After
installation, the protective cover can also be used as a dust cover for the speaker.
Inner carton
Protective
cover
Inner carton
Top protector
Bottom protector
Bottom lid
TAD-CR1_unpacking_En.indd 1
2009/09/14 9:24:45
