background image

© Tait Limited June 2013
www.taitradio.com
402-00080-01

TMAA05-01/TMAA05-04 GPS Receivers

Installation Instructions

 

Introduction

The TMAA05-01 and TMAA05-04 GPS receivers 
integrate a high performance 12-channel GPS receiver 
into a fully weatherproof, IPX7-rated housing.

The TMAA05-04 (shown at right) is supplied with a 
magnetic mount 

b

. The TMAA05-01 is identical, but 

is supplied without the magnetic mount.

The magnetic mount is available separately under part 
number TMAA05-02.

The TMAA05-03 mounting plate is also available 
where a permanent mounting is required.

Both GPS receivers include an adapter 

c

 for 

connecting to the auxiliary connector of your mobile 
radio.

The GPS receivers operate at a frequency of 
1575.42MHz (±10MHz).

Installation Precautions

Warning

When mounting the GPS receiver inside a vehicle, make sure you mount 

it securely. Unsecured equipment is dangerous to the vehicle occupants.

Notice

When drilling holes in a vehicle, check that drilling at the selected points will 

not damage existing wiring, fuel tanks, fuel lines, brake pipes or battery cables.

Notice

GPS accuracy may be influenced by close radiation sources (such as transmit-

ting radio antennas). This must be taken into consideration when choosing the mounting 
location of the GPS antenna and cabling. If unsure please contact your radio provider.

b

c

Reviews: