background image

 

O p e r a t i n g   I n s t r u c t i o n s

 

Model AK-160

MIST PROCESSOR

Table of Contents

Safety Precautions (To be strictly observed)

1

Name of Each Part………………………

4

Location of Warning Label……………

4

Accessories/Optional Items …………

5

Control Panel……………………………

6

Default Setting of Modes ……………

8

Change and Memorization of Setups

 8

Preparation ……………………………

 

 

 9

Description of Keys……………………

 6

Using the Open Mist Ball Nozzle (Option)

23

Using the Aromatherapy Diffuser Holder (Option)

24

Care and Cleaning ……………………

25

State Indication………………………

26

Before Asking for Repairs …………

27

Disposing of the Product……………

27

Consumable Supplies (Including Options)

28

Guidance on Daily Inspection………

28

Main Specifications …………………

29

201411

Rev.1

SPA MIST II

Installing/Detaching the Mist cap (Option)

 

18

 

Operation Procedures…………………

 

11

Book No.1A0FTPA0

Thank you for purchasing our product.
Please read through this manual and
this note carefully before installing or
using.These instructions provide important
information for correct usage of the product
to avoid personal injuries or property
damages against you or your clients.

This product is intended for the exclusive
use in hair salon or esthetic salon
for their treatment and service, and must
be operated or handled by the 
qualified/professional hairdressers
or by their staff under the supervision
of hairdressers.

Summary of Contents for SPA MIST II AK-160

































Reviews: