background image

1. Introduction

1.1  Purpose of the manual

 ......................................................................

 2

1.2  Disclaimer of liability

 ..........................................................................

 2

1.3  Production identification

 ..................................................................

 3

2.  Safety guidelines

2.1  General safety guldelines

.................................................................

3

2.2  Product precaution

 .............................................................................

4

2.3  Transport and storage safety guidelines

 .................................

 4

3.  Mechanical installation 

3.1  Selecting the location

 ........................................................................

 5

3.2  Selecting the proper supporting frame

 .....................................

 5

3.3  Frame holes mounting

 .......................................................................

 5

4.  Electrical mounting

4.1  Module selection

 ..................................................................................

 9

4.2  Safety factor

 ...........................................................................................

 9

4.3  General installation

 .............................................................................

 9

4.4 Grounding

 .............................................................................................

 10

5.  Commission and maintenance

5.1  Blocking diodes and bypass diode 

 .........................................

 10

5.2 Troubleshooting

 ................................................................................

 10

5.3 Maintenance

 ........................................................................................

 11

6.  Technical data

 ....................................................................................

 11

INSTALLATION MANUAL

For crystalline solar photovoltaic modules

According with IEC61215 edition 2 & IEC61730 standards

Installation manual for crystalline solar photovoltaic modules     

EN

Summary of Contents for TP536M-100

















Reviews: