Pay attention as water leakage or foreign objects entering into
the unit case is possible in the following cases.
- The case was closed with dust, hair, etc., on the rubber packing or
in the groove for the packing.
- The rubber packing becomes damaged. (In this case, please
purchase the optional maintenance set.)
- The unit suffered from significant temperature change while wet.
Especially in the case that the temperature changes from high to
low.
Operate the units with the latest version of [T&D Recorder for
Windows (5,7xU) ].
The latest version software can be downloaded from our home page.
Remove batteries from any unit that will not be used for a long
period of time. Batteries left in a unit not being used for a long
time may leak and cause a malfunction.
Do not use or store the unit in places such as listed below:
It may cause electrocution, fire or damage to the unit or to your
computer.
- Areas exposed to direct sunlight
- Areas exposed in water or high-pressure water flow.
- Areas exposed to organic solvents and corrosive gas.
- Areas exposed to strong magnetic fields
- Areas exposed to static electricity.
- Areas exposed to fire or overheating.
- Areas exposed to excessive dust or smoke.
We are not responsible for any malfunction or trouble caused
by the use of our product or by any problem caused by the
malfunction of our unit. Please be fully aware of this before
using our product.
This product has been designed for private or industrial
use only. It is not for use in situations where strict safety
precautions are necessary such as in connection with medical
equipment whether directly or indirectly.
Do not drop or expose the unit to strong impact.
Do not put your fingers or foreign matter into the sensor
connection.
Battery terminals may provide insufficient contact due to age or
vibration. Please be careful not to lose data due to insufficient
contact
Battery life depends on the measurement environment,
communication frequency, recording interval and battery
quality.
User's Manual
Thank you for purchasing this product.
Carefully read and fully understand these
instructions before using this unit.
Compact Waterproof Data Logger
Safety Precautions and Instructions
*
Please carefully observe the following safety measures when using our product.
To prevent any loss or damage to our customers, other people and / or property, and to ensure the proper use of our products we ask that before using our product
you carefully read, understand and follow the safety rules and precautions for our products as outlined below.
[Explanation of Warning Symbols]
DANGER
These entries are actions that absolutely under no circumstance
should be taken. The taking of such an action may cause serious
personal physical damage or death.
CAUTION
These entries are actions that if taken may lead to physical injury or
damage to persons or things.
[Explanation of Picture Symbols]
This symbol denotes an important warning or caution. Inside or near the
symbol will appear another symbol giving details.
This symbol denotes a forbidden action. Inside or near the symbol will appear
another symbol giving details.
This symbol denotes an action that you must take. Inside or near the symbol
will appear another symbol giving details.
Notices about this User's Manual
● Please read this manual carefully before using the product.
● All rights of this User's Manual belong to T&D Corporation. It is prohibited to
use, duplicate and/or arrange a part or whole of this User's Manual without
the permission of T&D Corporation.
● Please follow the safety precautions carefully. We cannot guarantee nor are
we responsible for safety if this product is used in any manner other than was
intended.
● T&D Corporation accepts no responsibility for any malfunction of and/or
trouble with this product or with your computer that is caused by the
improper handling of this product and will deem such trouble or malfunction
as falling outside the conditions for free repair of the attached warranty.
● T&D Corporation accepts no responsibility for any result or effects from using
this User's Manual.
● Figures and illustrations in this manual may be slightly simplified and may
differ from the actual product.
● On screen messages, figures or illustrations in this manual may vary slightly
or be simplified from the actual messages and product.
● We sincerely hope that the contents of this manual are true and complete. If
you find any information to have been omitted, or if the information within is
confusing or mistaken please contact your retailer or T&D Corporation.
● Microsoft
®
, Windows
®
and WindowsNT
®
are registered trademarks of
Microsoft Corporation USA and are binding in the USA and all other
countries. Company names and product names are trademarks or registered
trademarks of each company.
● Please carefully read this User's Manual and Free Repair Warranty.
● The warranty that is included in this User’s Manual cannot be reissued, so
please keep it in a safe place.
● The User’s Manual for this and all T&D products can be downloaded free of
charge from our Web Site.
●
This manual has been written using
℃
as the standard unit of temperature.
Please refer to the "Shift Unit" under "Editing the Graph" section of the
software manual for changing the unit to Fahrenheit.
Do not take apart, repair or modify the main unit.
It may cause fire, electrocution or damage. Ask the shop where you
purchased the products or T&D Corporation to carry out any repairs.
If any smoke or strange smells are emitted from the unit,
immediately cease using it.
Continued use may cause fire, electrocution or damage.
Do not use any batteries other than those that are
recommended. It may cause fire or damage.
If water or a foreign object enters the case, immediately cease
using it.
Store all batteries, sensors and Thermo Recorder units out of
the reach of children. It is dangerous to swallow batteries.
Please be careful when using in overly hot or cold
environments; touching the units may cause burns or frostbite.
Product Specifications
TR- 51A
TR-52
Measurement Channels
1 channel
(Sensor built in the main unit)
1 channel
(External sensor type)
Measurement Item
Temperature
Measurement Range
- 40 to 80°C
- 60 to 155°C
Measurement Accuracy
Typ.±0.5°C
Typ.±0.3°C(- 20 to 80°C)
Typ.±0.5°C(- 40 to - 20°C / 80 to 110°C)
Typ.±1.0°C(- 60 to - 40°C / 110 to 155°C)
Measurement Display
Resolution
0.1°C
Recording Capacity
16,000 data
Recording Interval
Select from 1,2,5,10,15,20,30
and 60 minutes
Select from 1,2,5,10,15,20 and 30 seconds
or from
1,2,5,10,15,20,30 and 60 minutes
Recording Mode
Endless (Overwrite oldest data when capacity is full)
One-time (Stop reading when capacity is full)
LCD Display Items
Temperature measured, recording conditions, battery life warning, memory
FULL, sensor unconnected, over measurement range and temperature
unit (°F / °C)
Power
Lithium battery ER3V M x 1
(Measurement range from - 40 to 80°C)
Available for lithium battery CR2
(Measurement range from - 20 to 60°C)
Battery Life
Maximum 2 years (depending on measurement environment
and quality of battery)
Waterproof Capacity
IP67
IP64
External Dimensions
H62 x W47 x D19mm (excluding protrusions)
Weight
Approx. 53g including battery
Approx. 55g including battery
Unit Temp. Resistance
- 40 to 80°C
Accessories Included
Lithium Battery ER3V M×1, Tube × 1, Strap × 1
User's Manual (Warranty) × 1
Specifications for TR-5106
Standard Sensor
TR-5106 x 1
Sensor Heat-Durability
- 70 to 180°C
Dimensions
Diameter: 2mm Cable length: 0.6m
Thermal-hour Constant
Approx.15 seconds in the air, Approx. 2 seconds in agitated water
Shielding
Teflon
®
resin
Waterproof Capacity
IP67 (Sensor Cable)
5652-169 Sasaga Matsumoto City NAGANO 399-0033 JAPAN
Tel:+81-263-27-2131 Fax:+81-263-26-4281
Homepage:http://www.tandd.jp/ E-mail:overseas@tandd.co.jp
FCC Compliance Statement for
American Users
This device complies with Part 15 of the FCC Rules.
Operation is subject to following two conditions: (1) this device may not cause
harmful interference. and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class A Digital Device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning
This equipment has been verified to comply with the limits for a Class A personal
digital device, pursuant to Subpart B of Part 15 of FCC Rules. Only peripherals
(computer input/output devices, terminals, printers, etc.) certified or verified to
comply with the Class A or B limits may be attached to this equipment. Operation
with non-certified or non-verified personal computer and/or peripherals is likely to
result in interference to radio and TV reception. The connection of a non-shielded
equipment interface cable to this equipment will invalidate the FCC Certification of
this device and may cause interference levels which exceed the limits established
by the FCC for this equipment.
You are cautioned that changes or modifications not expressly approved by party
responsible for compliance could void your authority to operate the equipment.
2005.04 16004034060
This is printed on 100% recycled paper.
