1
DM-4800
Technical Documentation
PRODUCT OVERVIEW
The TASCAM DM-4800 is the latest addition to TASCAM’s digital mixer line which provides a
flexible approach to mixing and/or recording. Full-sized motorized faders, 24 rotary encoders with ring
LED indicators, a dedicated “fat” channel set of controls providing instant access to common channel
settings, a large clear LCD display and ergonomically-placed dedicated system controls help to make
the DM-4800 intuitive and powerful to use.
The DM-4800 provides a comprehensive range of I/O facilities. For analog input the mixer features 24
balanced inputs; mic pre-amps, balanced line connections, and insert points. Both mic and line
connections may be made to the same channel with one-or-the-other able to be selected by a top panel
switch. There are eight assignable send outputs and inputs for external loop effects.
The digital side is comprised of three TDIF I/O ports, as well as ADAT “lightpipe” I/O and two pairs
of stereo S/PDIF or AES/EBU inputs and outputs. Four TASCAM-standard card slots provide I/O
expansion capabilities, with a variety of digital, analog, and computer options being available.
There are 24 groups, 12 aux sends, and 16 software assignable inserts independent of the analog inserts
on the inputs. The DM4800 incorporates digital effects, including a digital reverb programmed by TC
Works. External effects can be looped through the assignable analog sends and returns (the returns can
then be assigned to channels), or kept in the digital domain by using the stereo digital I/O facilities.
TASCAM 7733 Telegraph Road Montebello, CA 90640 (323) 726-0303
http://www.tascamcontractor.com
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
TASCAM DM-4800
