background image

©Copyright Task Force Tips, Inc. 2002 - 2015 

LIN-035 June 16, 2015 Rev15

MANUAL: Hand Held Automatic
Dual Pressure Nozzles

Mid-Force, CAFS-Force and Dual-Force

INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE

WARNING

Understand manual before use. Operation of this device without understanding the manual and 
receiving proper training is a misuse of this equipment. Obtain safety information at www.tft.
com/serial-number

TASK FORCE TIPS, INC.

MADE IN USA • www.tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219- 462-6161 • Fax 219-464-7155

DANGER

PERSONAL RESPONSIBILITY CODE

The member companies of FEMSA that provide emergency response 
equipment and services want responders to know and understand the 
following:

1. Firefi ghting and Emergency Response are inherently dangerous activities 

requiring proper training in their hazards and the use of extreme caution 
at all times.

2. It is your responsibility to read and understand any user’s instructions, 

including purpose and limitations, provided with any piece of equipment 
you may be called upon to use.

3. It is your responsibility to know that you have been properly trained in 

Firefi ghting and /or Emergency Response and in the use, precautions, and 
care of any equipment you may be called upon to use.

4. It is your responsibility to be in  proper physical condition and to maintain 

the personal skill level required to operate any equipment you may be 
called upon to use.

5. It is your responsibility to know that your equipment is in operable 

condition and has been maintained in accordance with the manufacturer’s 
instructions.

6. Failure to follow these guidelines may result in death, burns or other 

severe injury.

FEMSA

Fire and Emergency Manufacturers and Service Association

P.O. Box 147, Lynnfi eld, MA  01940 • www.FEMSA.org

MID-FORCE with 

IMPULSE

Trigger Valve System

MID-FORCE with Bail

Valve Handle

DUAL-FORCE with Bail

Valve Handle

Summary of Contents for Dual-Force





























Reviews: