background image

INSTALLATION INSTRUCTIONS

32-F238 / 32-F238SSS SINGLE SIDED INDICATOR DEADBOLT

 

 

 

IMPORTANT

document includes template must print at 100%

8.5 x 11”

For use on doors 1-3/8” to 1-3/4” (35-45 mm) thick

Tools required for new installation:

• Phillips head screwdriver

• 2-1/8” (54 mm) hole saw

• 1” (25.4 mm) drill bit

• Chisel

Tools required for replacement installation:

• Phillips head screw driver

THUMB TURN

ASSEMBLY

MOUNTING

SCREWS

DEADBOLT

INDICATOR

ASSEMBLY

STRIKE

WOOD FRAME

REINFORCER

DUST BOX

 

1

MARK DOOR

Measure center line of lock; height as 

desired from finished floor. Select 2-3/4” 

or optional 2-3/8” backset, fold and apply 

template to interior side of door and mark 

center of door as indicated on template. 

Mark center hole on door face through 

guide on template.

2

DRILL HOLES

Drill 2-1/8” (54 mm) hole through door face as 

marked for lockset. (It is recommended that 

holes be drilled from both sides on wood doors 

to prevent splitting.) Drill 1” (25.4 mm) hole in 

center of door edge for latch.

CENTER LINE

MARK FOR 2-1/8” 

(54 mm) HOLE 

ON DOOR FACE

MARK FOR

1” (25.4 mm) 

HOLE IN

DOOR EDGE

2-1/8” (54 mm)

HOLE

1” (25.4 mm)

HOLE

 

3

INSTALL LATCH

A. Insert latch in hole, keeping it parallel to face of door. Mark outline of latch face plate and remove latch.

B. Chisel 5/32” (4 mm) deep or until latch plate is flush with door edge.

C. Insert latch and tighten to the door using #8 screws.

DOOR EDGE      DOOR SIDE

TEMPLATE

FOLD HERE

ON DOOR EDGE

Ø2-1/8” (54 mm) HOLE

2-3/8” (60 mm) BACKSET

2-3/4” (70 mm) BACKSET

Make 1” (25.4 mm) hole at center of door edge

45 mm

(1-3/4”)

40 mm

(1-9/16”)

35 mm

(1-3/8”)

Reviews: