Application Specification
114-160156
08 MAR 22
Rev 5
1
of 7
QSFP-DD
Printed Circuit (PC) Board Connector
© 2022 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
www.te.com
.
NOTE
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters. Unless
otherwise specified, dimensions have a tolerance of ±0.13 and angles have a tolerance of ±2°. Figures are not drawn to
scale.
1.
INTRODUCTION
This specification covers the requirements for application of the 152 position QSFP-DD 112 Stacked pc
board connector. The connector consists of a housing with right-angle surface-mount contacts having
spacing on 0.8mm centerlines. The connector features a paddle card entry slot that accepts 1.00±0.10
thick integrated circuit card housed in a plug body with alignment posts for stability of placement and
needle-eye pins to secure the connector on the pc board. The connector is mounted on host pc board
and is used on coordination with an EMI cage attached to the same pc board. The pins and cage provide
proper alignment to the connector.
The connector is supplied in packaging trays for manual or robotic machine placement. Basic terms and
features of this product are provided in Figure 1.
Figure 1
2.
REFERENCE MATERIAL
2.1.
Revision Summary
Revisions to this application specification include:
2.2.
Customer Assistance
Reference example Product Base Part Number 2383477 represents the 152-position QSFP-DD 112
Stacked pc board connectors with needle-eye pins. Use of this number will identify the product line and
help you to obtain product and tooling information when visiting
bottom of this page.
2.3.
Customer Drawings
Customer drawings for product part numbers are available from
. Information contained in the
customer drawing takes priority.
Surface-Mount
Contacts
152 Position Connector
Contacts
Alignment Posts
Paddle Card
Entry Slots
Housing
Needle-Eye Pins
