T E A M K I T
S P O R T K I T
B A S I C K I T
Shocks: Hard anodized,
PTFE
-
coated gray.
Rear Axles: MIP CVD's.
Also includes: Ball bearings
throughout.
Shocks: Gold shocks.
Rear Axles: Associated dogbones &
stub axles.
Also includes: Mechanical speed
control and motor. Bushings
throughout.
Shocks: Gold shocks.
Rear Axles: Associated dogbones &
stub axles.
Also includes: Bushings
throughout.
All kit versions include:
2.40:1 transmission for effortless power handling.
Molded composite chassis for better rigidity and Lexan B3 racing body.
Quadra-symmetric suspension for greater stability and handling.
Optimized front end geometry improves steerging and increases rigidity.
Adjustable battery placement for fine tuning of traction or steering.
2.2" one-piece front and rear wheels.
Pro-Line 4 Rib M2 front tires and Pro-Line "Holeshot" M2 rear tires.
F A C T O R Y T E A M
Shocks: Hard anodized,
PTFE
-
coated gray.
Rear Axles: MIP CVD's.
Also includes: Factory Team
parts, ball bearings throughout.
2
YOU WILL NEED THESE TOOLS
TO ASSEMBLE YOUR KIT
Phillips screwdriver #2.
1/8" flat head screwdriver.
5/16" driver or glow plug wrench.
Needlenose pliers.
Super glue (cyanoacrylic glue).
Hobby knife
WARNING! This knife
cuts plastic and fingers with equal
ease, so be careful.
Precision ruler.
WARNING! Always use hand and eye
protection with cyanoacrylic glue!
for the
B3 Basic+ kit #9003
R/C two channel surface
frequency radio system
with one servo.
Battery pack (6 cell).
Battery charger (we recommend
a peak detection charger).
Electronic speed control.
Pinion gear, 48 ptich. Teeth to be
determined by type and wind of
motor.
R E Q U I R E D E Q U I P M E N T T O R U N Y O U R K I T
for the
B3 Sport kit #9013
R/C two channel surface
frequency radio system
with two servos.
Battery pack (6 cell).
Battery charger (we recommend
a peak detection charger).
for the
B3 Team kit #9032
R/C two channel surface
frequency radio system
with one servo.
Battery pack (6 cell).
Battery charger (we recommend
a peak detection charger).
Electronic speed control.
R/C electric motor.
Pinion gear, 48 ptich. Teeth to be
determined by type and wind of
motor.
TOOLS SUPPLIED
Allen wrenches, .050",
1/16", 3/32", 5/64".
Molded tools (#6956):
for the
Factory Team kit #9043
R/C two channel surface
frequency radio system
with one servo.
Battery pack (6 cell).
Battery charger (we recommend
a peak detection charger).
Electronic speed control.
R/C electric motor.
Pinion gear, 48 ptich. Teeth to be
determined by type and wind of
motor.
HELPFUL TOOLS (NOT REQUIRED)
Allen drivers (straight Allen wrenches with hex
shaped handles) such as the following made by
Associated:
#6957
.050" Allen wrench
#6958 1/16"
Allen
wrench
#6959 5/64"
Allen
wrench
#6960 3/32"
Allen
wrench
#6961 2.5mm
Allen
wrench
Hand drill with 1/8" & 1/4" bits
Vernier calipers
Hobby scissors
Liquid dish soap
Nut drivers (screwdriver-handled hex socket
tools) such as the following from Associated:
#SP-86 3/16" nut driver
#SP-85 1/4" nut driver
WARNING!
Do not use a power screwdriver to install screws into nylon, plastic, or
composite materials. The fast rotation speed can heat up the screws being
installed. They can then break the molded parts or strip the threads during
installation.
