TEBCO Carrier Assembly Instructions
Whilst this is not the only way to assemble the Carrier Tricycle,
we find this method mitigates any problems during the assembly process.
We recommend assembly is carried out by a qualified bicycle mechanic.
If you encounter any problems or have any questions
DO NOT HESITATE to call us on 1300 767 134.
Your Carrier Tricycle will have arrived in two boxes.
These contain the front and rear sections. Check you
have all the required parts from the photos above.
The front section should contain those items pictured
above.
The rear section will contain everything else.
Remove all the bubble wrap from your new tricycle.
First, place the motorised front wheel into the forks.
Ensure that the washer is placed on the outside of
the fork, and that the cable comes out the right side
of the wheel.
Take special care to ensure the anti-rotational
washer is correctly seated in the cut-out in the forks.
This is critically important as the torsional force of the
motor is borne by the forks.
